In Situ Test Research on Friction Resistance of Self-Anchored Test Pile

The traditional static load test method has been considered as the most direct and reliable method to determine the bearing capacity of single pile, but it has some disadvantages, such as inconvenient operation, laborious test, high cost, and being time-consuming. In this paper, a new type of pile testing method, self-anchored pile testing method, was proposed, and the in situ test was carried out for the first time. This method allows the upper and lower piles to provide force to each other and does not occupy other construction spaces. It had the advantages of simple operation and being economical and practical. Based on the Q-w curve, axial force distribution curve, and hyperbolic function model of load transfer, this paper studied the evolution law of friction of self-anchored test pile and the load transfer process of self-anchored test pile. The results show that the load transfer process of self-anchored pile-soil interface can be divided into three stages: elastic, elastic-plastic, and limit state. The friction of the upper and lower piles starts from the bottom of each pile and then gradually increases. The soil around the upper and lower piles gradually undergoes nonlinear deformation and shear failure, and the pile soil reaches the yield state. By analyzing the hyperbolic function model of load transfer, it shows that the hyperbolic function model can be better applied to the self-anchored test pile, which has reference value for the selection of the function model of self-anchored test pile in the future.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.