0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Impact of Plant Root Morphology on Rooted-Soil Shear Resistance Using Triaxial Testing

Author(s):


Medium: journal article
Language(s): English
Published in: Advances in Civil Engineering, , v. 2020
Page(s): 1-13
DOI: 10.1155/2020/8825828
Abstract:

Mechanical reinforcement by plant roots increases the soil shearing strength. The geometric and distribution characteristics of plant roots affect the soil shearing strength. Current research on the shear strength of rooted-soil is mostly based on direct shear tests with a fixed shear surface and thus cannot reflect the actual failure state of the rooted-soil. In this study, Golden Vicary Privet was used to create a rooted-soil, and a triaxial test method was used for soil mechanical property analysis. The influence of the root geometry (root diameter and individual root length) and distribution characteristics (root density and root distribution angle) on the rooted-soil shearing strength was studied by controlling the root morphology in the specimens. According to the results, both the root geometry and distribution characteristics affect the rooted-soil shearing strength. For a fixed total length of the roots, the longer the individual root length is, the better the soil shearing strength is. In addition, the reinforcement effect of the root system increases as the angle between the root and the potential failure surface increases. The results also show that the root system significantly enhances the soil cohesion while only minimally affecting the internal friction angle. The maximum rooted-soil cohesion is 2.39 times that of the plain soil cohesion, and the maximum internal friction angle of rooted-soil is 1.24 times that of plain soil. This paper provides an approach for the determination of the rooted-soil strength and a rationale for vegetation selection in ecological slope reinforcement applications.

Copyright: © Suyun Meng et al.
License:

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.

  • About this
    data sheet
  • Reference-ID
    10474980
  • Published on:
    15/11/2020
  • Last updated on:
    02/06/2021
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine