Fatigue improvement of rib‐to‐deck welded joints using adhesively bonded steel patches ‐ LEFM‐based parametric study
| Author(s): |
Xudong Wang
(Department of the Built Environment Eindhoven University of Technology Eindhoven 5612 AP The Netherlands)
Davide Leonetti (Department of the Built Environment Eindhoven University of Technology Eindhoven 5612 AP The Netherlands) Changqing Miao (School of Civil Engineering Southeast University Nanjing 211189 China) H. H. (Bert) Snijder (Department of the Built Environment Eindhoven University of Technology Eindhoven 5612 AP The Netherlands) |
|---|---|
| Medium: | journal article |
| Language(s): | English |
| Published in: | ce/papers, September 2023, n. 3-4, v. 6 |
| Page(s): | 2468-2474 |
| DOI: | 10.1002/cepa.2381 |
| Abstract: |
Rib‐to‐deck welded joints in orthotropic steel decks of bridges are prone to develop fatigue cracks. Repairing such cracks allows for prolonging the life of the infrastructure, provided that structural safety is guaranteed. Among others, the repair technique of adhesively bonded steel patches is relatively simple and inexpensive. Moreover, it has the advantage that the original structure is not altered, e.g. as in the case of crack stop holes. This technique has been used in other details like the diaphragm of steel bridges. However, limited information is available when applied to rib‐to‐deck joints, which are the most common joint type in orthotropic steel decks. This study proposes two repair schemes using adhesively bonded steel patches for the rib‐to‐deck joints. A 3‐D finite element model which takes account of the crack size is established. Based on linear elastic fracture mechanics (LEFM), a parametric study is performed to investigate the effect of patch geometry and adhesive thickness on the performance of repair schemes. |
- About this
data sheet - Reference-ID
10767125 - Published on:
17/04/2024 - Last updated on:
17/04/2024
