0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Exploring the Potential of Polypropylene Fibers and Bacterial Co-Culture in Repairing and Strengthening Geopolymer-Based Construction Materials

Author(s):

ORCID
ORCID
Medium: journal article
Language(s): English
Published in: Buildings, , n. 10, v. 13
Page(s): 2668
DOI: 10.3390/buildings13102668
Abstract:

This study explored self-healing in geopolymer mortar cured at ambient temperature using polypropylene fibers and bacterial co-cultures of Bacillus subtilis and Bacillus megaterium. Damage degree, compressive strength, ultrasonic pulse velocity (UPV), strength-regain percentage, and self-healing percentage were evaluated. A full factorial design was used, which resulted in an eight-run complete factorial design with four levels in the first factor (polypropylene content: 0%, 0.25%, 0.5%, and 0.75%) and two levels in the second factor (bacteria concentration: 0 (without) and 1 (with)). The results indicate that increasing the polypropylene fiber content enhanced strength regains up to 199.97% with 0.75% fibers and bacteria. The bacteria alone improved strength-regain percentages by 11.22% through mineral precipitation. The analysis of variance (ANOVA) showed no interaction between fibers and bacteria, but both independently improved the compressive strength. Only bacterial samples exhibited positive self-healing, ranging from 16.77 to 147.18%. The analysis using a scanning electron microscope with energy dispersive X-ray (SEM-EDX) and X-ray fluorescence (XRF) also revealed greater calcite crystal formation in bacterial samples, increasing the strength-regain and self-healing percentages. The results demonstrate that polypropylene fibers and bacteria cultures could substantially enhance the strength, durability, and self-healing percentage of geopolymer mortars. The findings present the potential of a bio-based self-healing approach for sustainable construction and repair materials.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
License:

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.

  • About this
    data sheet
  • Reference-ID
    10744362
  • Published on:
    28/10/2023
  • Last updated on:
    07/02/2024
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine