Experimental study of the mechanical behavior of self-compacting concrete based on fracture mechanics

Considering the physical nonlinearity of concrete and the fundamentals of fracture mechanics for quasi-brittle materials, the objective of this study was to determine the fracture energy and the length of the fracture process zone (FPZ) as well as the modulus of elasticity, the tensile strength and the compressive strength of self-compacting concrete (SCC) to characterize its mechanical behavior. A series of tests, including a three-point bending test of SCC and conventional vibrated concrete (CVC) specimens, with a notch at mid-span, and tensile and compressive tests were performed. The mechanical parameters obtained from the CVC specimens were considered as a comparative reference. The effect of the following variables was evaluated and considered at two levels: compressive strength (30 and 50 MPa), granular composition (fine and coarse particle size) and maximum diameter of the aggregate (12 and 20 mm). The effect of these variables on the mechanical behaviors of the SCC specimens was evaluated based on the test results of specimens of four types of concrete, which were obtained from the combination of the variables. The bending tests were performed according to the RILEM TC 89-FMT recommendations, which are based on the size-effect method.