The Experimental Study of the Effective Thermal Conductivity of Bundles of Rectangular Steel Sections/ Badania Eksperymentalne Efektywnej Przewodności Cieplnej Wiązek Stalowych Profili Prostokątnych
| Author(s): |
Rafał Wyczółkowski
(Dr. Eng., Department of Industrial Furnaces and Environmental Protection, Czestochowa University of Technology, Al Armii Krajowej 19, 42-200 Częstochowa, Poland)
Agnieszka Benduch (Czestochowa University of Technology Department of Industrial Furnaces and Environmental Protection, Poland) |
|---|---|
| Medium: | journal article |
| Language(s): | English |
| Published in: | Civil and Environmental Engineering Reports, September 2014, n. 3, v. 14 |
| Page(s): | 119-132 |
| DOI: | 10.1515/ceer-2014-0030 |
| Abstract: |
Bundles of rectangular steel sections are examples of the porous charge. Due to the voids within the sections, this type of charge is characterized by porosity even exceeding 85%. This makes the thermal properties of these elements, expressed by the effective thermal conductivity kef, totally different from the thermal conductivity of steel. The value of the kef coefficient depends on many factors such as: the ratio of the thermal conductivity of steel to that of gas, the structure of the solid matrix and its porosity and the lack of the continuity of the steel phase. The paper describes experimental investigations concerning the measurements of the effective thermal conductivity of a steel sections bundles. |
- About this
data sheet - Reference-ID
10705382 - Published on:
19/02/2023 - Last updated on:
19/02/2023
Structurae cooperates with
