Experimental Research on the Seismic Ductility Performance of Wavy Web PEC Beams

To improve the out-of-plane stability of partially encased composite (PEC) beam webs and enhance the synergy between concrete and section steel, a new type of wavy web PEC beam was designed and fabricated. In this study, the flange thickness and shear–span ratio were varied as key parameters. Low-cycle reversed loading tests were conducted to investigate the effects of these variables on the load-bearing capacity, failure patterns, deformation capacity, hysteretic energy dissipation capacity, and stiffness degradation of the wavy web PEC beams. Numerical simulations were performed using ABAQUS CAE2023, a finite element analysis (FEA) software, under low-cycle reversed loading conditions. The applicability of the ABAQUS software CAE2023 for the corrugated web PEC beam model was validated by comparing test results with finite element analysis results. A detailed parametric analysis was then carried out using the finite element model to further investigate the mechanical properties of the wavy web PEC beams. The research findings are as follows: the wavy web PEC beams exhibited good ductility; a larger shear–span ratio led to a transition in the failure pattern from shear failure to flexural failure; varying the flange thickness significantly affected the failure location and characteristics; and reducing the flange thickness could limit the propagation of concrete cracks, thereby improving toughness and energy dissipation capacity.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.