Experimental Investigations on load‐bearing Capacity and characteristic Preload of Lockstud Systems
Author(s): |
Melanie Hagemann née Meyer
(University of Applied Sciences Wismar Germany)
Mathias Schwarz (Fraunhofer‐Institute for Large Structures in Production Engineering IGP Rostock Germany) Ralf Glienke (University of Applied Sciences Wismar Germany) Daniela Schwerdt (University of Applied Sciences Wismar Germany) Knuth‐Michael Henkel (University Rostock, Lehrstuhl für Fügetechnik Rostock Germany) |
---|---|
Medium: | journal article |
Language(s): | English |
Published in: | ce/papers, September 2023, n. 3-4, v. 6 |
Page(s): | 1250-1255 |
DOI: | 10.1002/cepa.2424 |
Abstract: |
The joining technology Lockstud System combines the advantages of a bolt thread for making a tapped thread joint and the advantages of a lockbolt. On the tapped thread joining side, the bolt has a metric ISO thread. On the assembly side, the bolt has a grooved geometry like lockbolts of type A, B and C. This article publishes results on the mechanical‐technological properties, the assembly process with the initial preload, the preload losses due to embedding under long period of time and the load‐bearing capacity subjected to static and fatigue normal stress for Lockstud systems of nominal diameters M12, M16 and M20 (strength grade 10.9) compared to conventional bolt assemblies and lockbolt systems. |
- About this
data sheet - Reference-ID
10767350 - Published on:
17/04/2024 - Last updated on:
17/04/2024