0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Experimental and Numerical Investigations on an Organic Phase Change Material Incorporated Cool Concrete Pavement

Author(s):


Medium: journal article
Language(s): English
Published in: The Open Civil Engineering Journal, , n. 1, v. 16
DOI: 10.2174/18741495-v16-e221026-2022-ht31-3975-2
Abstract:

Background

Traditionally, cool pavements have been designed as reflective pavements and evaporative pavements etc. Though the reflective pavements reduce the pavement surface temperature significantly, they increase glare, thermal burden on pedestrian traffic, and temperature of nearby buildings. In case of evaporative pavements, absence of water, reduced thermal inertia and solar reflection result in a higher pavement temperature. As a result, there has been a pressing need to investigate on new low side-effect cool pavement options.

Objective

The aim of the study is to analyze the effect of phase change material (PCM) incorporation on the thermal performance of concrete pavements and to develop a total enthalpy-based numerical heat transfer model for such cool pavements.

Materials and Methods

A paraffin-based organic PCM with a melting point of 42 to 45 °C was used in this work and expanded clay aggregate (ECA) was used as encapsulation medium. Concrete slabs without and with incorporation of PCM impregnated ECAs were cast and thermocouples were implanted in the concrete to monitor the pavement temperature continuously. A total enthalpy-based numerical heat transfer model was developed to predict the thermal performance of such cool concrete pavements.

Results

The PCM incorporation resulted in a reduction of 2.24 °C in the annual average pavement surface temperature with a maximum reduction of 4.12 °C.

Conclusion

PCM incorporation is an effective method to reduce pavement surface temperature during daytime making the pavements cooler. Increasing the porosity of the encapsulating medium and also increasing the thermal conductivity of the concrete slab enhances the cooling potential. However, the thermal characteristics of the encapsulating material may be neglected as their impact is less on the cooling potential.

Structurae cannot make the full text of this publication available at this time. The full text can be accessed through the publisher via the DOI: 10.2174/18741495-v16-e221026-2022-ht31-3975-2.
  • About this
    data sheet
  • Reference-ID
    10698100
  • Published on:
    11/12/2022
  • Last updated on:
    11/12/2022
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine