Experimental and Numerical Investigation of Welding Residual Stress of U-Rib Joints in Orthotropic Steel Bridge Decks

The residual stresses at U-rib joints have a significant adverse impact on the structure. Therefore, it is necessary to conduct research and analysis on their residual stresses. Based on experimental testing and thermal elastic-plastic finite element analysis (FEA), this study investigates the residual stress (RS) of a U-rib joint using gas metal arc welding in an orthotropic steel bridge deck (OSBD). X-ray diffraction (XRD) was adopted to measure the RS of the U-rib welds, and the measurement results were utilized to verify the FEA. The effects of the weld root gap, weld penetration, and weld groove angle on the RS of U-rib welds were investigated by using FEA. The weld root gap had minor effect on the RS of the U-rib welds. With an increase in weld penetration, the peak values of the transverse tensile RS at both the deck plate and the U-rib weld toes increased. Additionally, an enlargement of the groove angle also resulted in a notable increase in the transverse tensile RS peak at the deck plate weld toe.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.