Experimental and Analytical Study on the Axial Behavior of Circular High-Strength Concrete Columns with Hybrid Carbon Fibers and Steel Confinement System

This paper describes a work that examines a new solution to the problem that arises from the relatively high amount of transverse reinforcement required in HSC columns. It presents an alternative to common transverse steel reinforcement, a dual system comprising steel ties and a carbon-fiber mesh (CFM) applied internally together with steel ties. The behavior of the proposed system was examined in this work in a series of twelve laboratory tests of circular stub column specimens. The experiments performed in this work focused on the columns’ load and displacement capacities. The tests were planned with the aid of an analytical model that was originally developed for a hybrid system of external fiber-reinforced polymer (FRP) sheets and internal steel, and was adapted for the current system. An analysis of the results shows that for a given amount of conventional transverse steel, the application of the carbon-fiber meshes adds efficiency to the rebar confinement system, in terms of both the load bearing capacity and the ductility, and for specimens with the hybrid confinement system, the higher the carbon fiber amount the larger the ductility improvement. Furthermore, fair to good agreement was observed between the model and the measured stress–strain curves, especially those of the peak stresses. Based on the above findings and the added benefit of fire resistance, the hybrid method appears to be promising for confining HSC columns.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.