Experiment on Freeze–Thaw Resistance of Tunnel Portal-Lining Concrete with Silicone Coating in Cold Regions

The freeze–thaw effect has a significant impact on the strength deterioration of tunnel-lining concrete in cold regions. Therefore, the strength deterioration characteristics of concrete in a tunnel were studied, and silicone coating materials were used to improve its frost resistance and durability under freeze–thaw cycles. Freeze–thaw cycle tests were conducted on concrete specimens with different coatings. The freeze–thaw damage phenomenon, dynamic elastic modulus, and mass loss of the specimens were used to evaluate the freeze–thaw durability of concrete strengthened with coatings. The results demonstrated that silicone coatings effectively prevented moisture and corrosive substances from infiltrating the concrete, thereby enhancing its durability; the silicone–polyether hybrid had the most significant frost resistance at 500 g/m2 and silane type III at 300 g/m2, with freezing resistance times of 175 and 300, respectively. During the freeze–thaw process, the strength reduction rate of specimens was much greater than the mass loss rate of concrete. Taking into account the water environment surrounding the lining concrete and the site temperature, an equivalent indoor freeze–thaw cycle conversion model was established. The results can provide an experimental basis for selecting better frost-resistant materials for tunnel concrete in cold regions.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.