Evaluation of Cherts in Gumushane Province in Terms of Alkali Silica Reaction

Alkali–silica reaction (ASR) occurs when alkali oxides coming from the cement composition in concrete come together with reactive silica and moisture coming from the aggregate. Additional maintenance and repair costs caused by the development of ASR in concrete cause the cost to increase. However, thanks to the measures taken against ASR in the early period, it contributes to the creation of sustainable and durable concrete structures. The article investigated the usability of cherts with eight different chemical compositions as aggregates in ready-mixed concrete plants in Gümüşhane. Cherts have been investigated for alkaline reactivity and are intended to be used largely as a source for concrete plants. ASR length changes of the samples prepared according to ASTM C1260 standard were determined after 3, 7, 14, and 28 days of the curing period. Microstructural examination, ultrasonic P-wave velocity, and bending and compressive strength experiments supporting ASR were carried out. The obtained test results were compared between the reference (limestone) sample and each other, as well as with the values specified in the standards. The compressive and bending strength values of the samples increase depending on their ASR. It was observed that the crack structures and types increased depending on the increase in the crack values.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.