Effects of Concrete Strength and CFRP Cloth Ratio on the Shear Performance of CFRP Cloth Strengthened RC Beams

A three-dimensional meso-scale numerical model, which considers (1) the concrete meso-structures, (2) the bond slip between concrete internal structures and steel bars, and (3) the stripping behavior of carbon fiber reinforced polymer (CFRP) cloth from the surface of the concrete component, is established to investigate the effects of concrete strength and the CFRP cloth ratio on the shear performance of reinforced concrete (RC) beams. On the basis of verifying the rationality of the shear failure model and the feasibility of the CFRP reinforcement simulation method, 30 orthogonally designed numerical models of six kinds of concrete strength and five kinds of CFRP cloth ratios were designed and established. Based on the numerical simulation results, this paper analyzes the damage evolution of the CFRP–concrete interface, the variation trend of CFRP strain along the height direction of beam, the failure mode, and the load-displacement curve. Results show the following: (1) With the increase of concrete strength grade and CFRP cloth ratio, the shear strength of RC beams strengthened with increases in CFRP cloth ratio, the influence range of concrete strength grade is 24–50%, and the influence range of the CFRP cloth ratio is 10–25%; (2) The improvement range decreases, and the improvement range of the concrete strength grade decreases, and the reduction range is about 20%; (3) Based on the simulation results, influences of concrete strength and CFRP cloth ratio on the shear strength of CFRP cloth-strengthened RC beams are quantitatively considered.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.