Effect of Welding Separation Characteristics on the Cyclic Behavior of Steel Plate Shear Walls

Currently, the steel plate shear wall (SPSW) is commonly used in high-rise steel buildings as a lateral load-resisting system due to its several advantages such as its lightweight and high ductility and strength. The SPSW consists of two main parts, i.e., the boundary frame and infill plate, which are connected by welding. The objective of this work is to study the effect of the infill plate weld separation on the seismic behavior of the SPSWs. A numerical method was proposed to have a comprehensive comparison of seismic behaviors of different separation characteristics. The model was validated by using previously published experimental works. Key parameters, such as load-carrying capacity, stiffness, and energy-dissipation capacity, were discussed extensively. The unstiffened SPSW (USPSW) system is more sensitive to the plate–beam separation than the plate–column one, especially the corner plate–beam separation. When plate–column welding separation occurs, the initial stiffness and the energy dissipation capacity are reduced by approximately 21% and 14%, respectively; however, the reductions are 36% and 20.5% in the case of beam welding separation.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.