Effect of pore modulating additives-sepiolite and colloidal nano silica-on physical, mechanical and durability properties of lime-based renders

In hot-humid climates, porous external surfaces of the buildings with high water sorption capabilities could contribute to the surface temperatures reduction through the release of latent heat by evaporative cooling. On the other hand, compact and low permeable finishing materials could have mechanical and durability benefits respect to the underlying supports, for example reducing the permeability to degrading agents. In this paper, the properties of lime base coat renders with pore modulating additives (sepiolite and colloidal nano silica) have been surveyed to evaluate their effectiveness in water absorption, thermal performance, and the fulfilment of mechanical requirements for the application on the external side of the walls. A traditional lime–sand formulation was taken as reference. After preliminary tests on workability and shrinkage, the optimal mix designs were selected and the samples were subjected to several mechanical and thermo-hygrometric tests, before and after accelerated aging. The results allowed demonstrating that the use of sepiolite in substitution of sand, enhances the render ductility, thermal resistance and water uptake but worsens its mechanical stability, increasing the shrinkage effects and slightly reducing the ultimate strength values. The addition of colloidal nano silica, either to lime–sepiolite or to lime–sand renders, fails to produce any improvement in their either physical or mechanical behavior. Mixed formulations (lime–sand with sepiolite and nano silica) behave as simple lime–sand solutions, showing optimal compressive and flexural strength but reduced water uptake capabilities. This demonstrates that the presence of sand prevails in the performance of the render, and that the adoption of other additives doesn’t worth the cost for the benefit presented.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.