0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Effect of Footing Shape on the Rocking Behavior of Shallow Foundations

Author(s):
ORCID



Medium: journal article
Language(s): English
Published in: Buildings, , n. 3, v. 14
Page(s): 573
DOI: 10.3390/buildings14030573
Abstract:

Sources such as wind or severe seismic activity often exert extreme lateral loading onto the shallow foundations supporting high-rise structures such as bridge piers, buildings, shear walls, and wind turbine towers. Such loading conditions may cause the foundation to exhibit nonlinear responses such as uplift and bearing capacity mobilization of the supporting soil (i.e., rocking behavior). Previous numerical and experimental studies suggest that while such inelastic behaviors may engender residual deformations in the soil–foundation system, they offer potential benefits to the overall integrity of structures through dissipating energy and reducing inertia forces transmitted to the superstructure, thereby limiting seismic demand on structural elements. This study investigates the effect of footing shape on the rocking performance of shallow foundations in different subgrade densities and initial vertical factor of safety (FSv). To this end, a series of reduced-scale slow cyclic tests under 1 g condition were conducted using a single degree of freedom (SDOF) structure model. The performance of different footing shapes was studied in terms of moment capacity, recentering ratio, rocking stiffness, damping ratio, and settlement. For three foundations with different length-to-width ratios, the results indicate that increasing the safety factor and length-to-width ratio leads to thinner, S-shaped moment–rotation curves, mainly owing to the enhanced recentering capability and the P-δ effect. Moreover, across all foundation types, the repetition of a limited loading cycles with consistent rotation amplitude does not cause stiffness degradation or moment capacity reduction.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
License:

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.

  • About this
    data sheet
  • Reference-ID
    10773629
  • Published on:
    29/04/2024
  • Last updated on:
    05/06/2024
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine