0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Effect of Chemical Admixtures on the Working Performance and Mechanical Properties of Cement-Based Self-Leveling Mortar

Author(s):
ORCID




ORCID

Medium: journal article
Language(s): English
Published in: Buildings, , n. 9, v. 13
Page(s): 2248
DOI: 10.3390/buildings13092248
Abstract:

In this work, the effect of cellulose ether (CE), tartaric acid (TA), and polycarboxylate superplasticizer (PCE) on the working performance and mechanical properties of cement-based self-leveling mortar is investigated. According to the orthogonal experiment analysis, TA is identified as the most influential factor affecting the working performance, as indicated by factors such as fluidity, fluidity loss, and viscosity. Upon conducting a comprehensive assessment of the working performance and mechanical properties, the optimal parameters are found to be CE = 0.6 wt.‰, TA = 0.5 wt.‰, and PCE = 2.0 wt.‰. A univariate test highlights that that the working performance improves with the higher TA dosages. Specifically, the exponential reduction of fluidity loss corresponds with an increased TA content. Regarding the mechanical properties of cement-based self-leveling mortar, the compressive and flexural strength exhibit enhancement when the TA dosage remains below 0.4 wt.‰ at the early stage, implying that TA has some influence on the hydration process. Impressively, the 1 d compressive and flexural strengths surpass 7 MPa and 2 MPa, respectively, ensuring the viability of subsequent construction activities. Through an analysis of hydration heat, the effect mechanism of TA on the cement-based self-leveling mortar is derived. The result shows that the addition of TA decelerates the hydration process within the initial 10 h, followed by acceleration in the subsequent 20 h to 30 h. Consequently, this delayed formation of the early hydration product, ettringite, contributes to a more porous structure in the slurry, with low friction leading to a better working performance. A large number of hydration products, such as alumina gel and calcium–silicon–hydrate gel, presented in the hardened paste results in the good mechanical properties at 1 d. This study may lay a foundation for the optimization of the dosage of chemical admixtures in the self-leveling mortar and high-performance cement-based materials, and also impart valuable insights for practical applications extending to the realm of building construction and decoration.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
License:

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.

  • About this
    data sheet
  • Reference-ID
    10740696
  • Published on:
    12/09/2023
  • Last updated on:
    14/09/2023
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine