0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Design, simulation, and experimental investigation on a novel multi-drive pattern three-degree-of-freedom rotary piezoelectric motor

Author(s): ORCID


ORCID
ORCID

Medium: journal article
Language(s): English
Published in: Smart Materials and Structures, , n. 12, v. 32
Page(s): 125022
DOI: 10.1088/1361-665x/ad0b1c
Abstract:

Three-degree-of-freedom (3-DOF) rotary piezoelectric motors often suffer from low positioning accuracy, complex excitation signals, and uneven preloading, limiting their application in precision drive systems. To address these issues, this study proposes a novel multi-drive pattern 3-DOF rotary piezoelectric motor, comprising a sandwich-type hollow cylindrical stator, a spherical rotor, and a pre-tightening structure. The proposed motor can operate in both inertial and traveling wave drive patterns. In the inertial drive pattern, the first_order and the third-order bending vibration modes of the stator are simultaneously excited by a sawtooth wave signal, generating a saw-tooth displacement on its driving feet to rotate the rotor around the x or y-axis. In the traveling wave drive pattern, two mutually orthogonal first_order bending vibration modes of the stator are simultaneously stimulated by two sinusoidal signals, generating a traveling wave on its driving feet to rotate the rotor around the z-axis. Initially, finite element analysis is used to simulate the operating principle of the stator and determine its geometric dimensions. Subsequently, a prototype of the sandwich-type hollow cylindrical stator is fabricated, and its vibration characteristics are tested to confirm the validation of the proposed operating principle and the correctness of the finite element simulation. Finally, a prototype of the proposed 3-DOF rotary piezoelectric motor is assembled, and its mechanical output characteristics are experimentally evaluated. Experimental results indicate that when the excitation voltage is 200 Vpp, the no-load rotary velocities of the motor prototype in three rotation directions are 79 r min−1, 76 r min−1, and 101 r min−1, respectively, start/stop response times are 10 ms/8.6 ms, 13.4 ms/6.2 ms, and 15.5 ms/7.7 ms, respectively, and the angular displacement resolutions are 7.4 μrad, 8 μrad, and 11.4 μrad, respectively. The proposed motor exhibits high mechanical integration, 3-DOF rotation, few excitation signals, adjustable pre-tightening force, and high positioning accuracy advantages, holding the potential applications in fields such as robotic technology and space pointing mechanisms.

Structurae cannot make the full text of this publication available at this time. The full text can be accessed through the publisher via the DOI: 10.1088/1361-665x/ad0b1c.
  • About this
    data sheet
  • Reference-ID
    10748422
  • Published on:
    14/01/2024
  • Last updated on:
    14/01/2024
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine