Design Reliability Analysis of Cold-Formed Thin-Walled Steel Members with Lipped Channel Sections Considering Distortional Buckling

Introduction:

Based on the experimental results of cold-formed thin-walled steel lipped channel sections, the uncertainty of calculating mode of load-carrying capacity using effective width method considering distortional buckling for different material types cold-formed steel compressed members was researched, and the uncertainties of material strength and geometric characteristics of the typical sections were statistically analyzed.

Methods:

According to the recommended resistance of partial coefficient in the draft ofTechnical code of cold-formed steel structures(GB50018-), the reliability indexes of cold-formed thin-walled steel lipped channel sections under compression were investigated using the improved first-order second-moment method considering different possible external loading combinations.

Results:

The analyzed results show that, using the recommended resistance partial coefficient in the code draft, the reliability indexes of the compressed members with width-thickness ratio within the limitation of code draft can well met the target reliability index. The suitability of the corresponding calculating modes of load-carrying capacity considering distortional buckling was established.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.