Daylighting Retrofit Methods as a Tool for Enhancing Daylight Provision in Existing Educational Spaces—A Case Study

Adequate illuminance has a great effect on the health, comfort, and performance of pupils. It can be achieved by either artificial lighting or daylighting. Daylighting is usually preferred due to psychological, physiological, and economic purposes. This study aims to improve the daylight provision in existing classrooms, by investigating various retrofit methods for passive daylighting techniques in northerly oriented classrooms at Jordan University of Science and Technology (JUST). Data for this research are obtained using computer simulation. The retrofit methods are evaluated in terms of illuminance levels on the desks plane and the chalkboard. The retrofit methods investigated in this study included improving the material reflectance, adding clerestory to the classroom, lightshelves, anidolic ducts, as well as various combinations between these cases. By comparing the results, and in light of the recommended lighting level by The Lighting Guide 5: Lighting for Education released by Chartered Institution of Building Services Engineers (CIBSE) in 2011, the combination of the clerestory window and the anidolic ducts result in the best results. While CIBSE recommended a target illuminance of 300 lx on desks plane and 500 lx on the board, the combination registers an average of 249 lx–300 lx on the desks plane in all sensors compared to 42 lx–105 lx in the base case, and an average of 275 lx–345 lx on the board for the tested dates compared to an average of 45 lx–115 lx in the base case.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.