Crack Detection in Bearing Plate of Prestressed Anchorage Using Electromechanical Impedance Technique: A Numerical Investigation

The bearing plate is an important part of a tendon–anchorage subsystem; however, its function and safety can be compromised by factors such as fatigue and corrosion. This paper explores the feasibility of the electromechanical impedance (EMI) technique for fatigue crack detection in the bearing plate of a prestressed anchorage. Firstly, the theory of the EMI technique is presented. Next, a well-established prestressed anchorage in the literature is selected as the target structure. Thirdly, a 3D finite element model of the PZT transducer–target anchorage subsystem is simulated, consisting of a concrete segment, a steel anchor head, and a steel bearing plate instrumented with a PZT transducer. The prestress load is applied to the anchorage via the anchor head. The EMI response of the target structure is numerically obtained under different simulated fatigue cracks in the bearing plate using the linear impedance analysis in the frequency domain. Finally, the resulting EMI response was quantified using two damage metrics: root-mean-square deviation and correlation coefficient deviation. These metrics are then compared with a threshold to identify the presence of cracks in the bearing plate. The results show that the simulated cracks in the bearing plate are successfully detected by tracking the shifts in the damage metrics. The numerical investigation demonstrates the potential of the EMI technique as a non-destructive testing method for assessing the structural integrity of prestressed structures.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.