0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Cost-Optimal Renovation Solutions for Detached Rural Houses in Severe Cold Regions of China

Author(s): ORCID
ORCID
ORCID
ORCID
ORCID
Medium: journal article
Language(s): English
Published in: Buildings, , n. 3, v. 13
Page(s): 771
DOI: 10.3390/buildings13030771
Abstract:

High heating expenses are observed in numerous Chinese rural houses located in severe cold regions due to the high heating demand, inferior envelope performance and low-efficiency heating equipment. The local traditional heating methods include Chinese Kangs and coal boilers with water-based radiators. The intermittent operation and manual regulation of these systems result in significant temperature differences and inadequate thermal comfort. This study presents the cost-optimal envelope renovation solutions with the minimized lifecycle cost (LCC) during a 20-year discount period and CO2 emissions of annual delivered energy consumptions. A single-family detached rural house in Harbin was used as a case building, illustrating the typical state of comparable houses in this climate context. Simulation-based multi-optimization analysis was conducted in this study using the building simulation tool IDA ICE and its integrated optimization tool AutoMOO. The results indicate that the cost-optimal renovation solutions with intermittent and continuous heating can cut CO2 emissions by 30% and 40%, respectively. The LCC with intermittent heating is still 7% greater than its pre-renovation case, which may require external financial support to encourage the renovation conduction, while the LCC with continuous heating decreased by 8% after renovation. According to the comparison results, cost-optimal solutions have significant advantages in both reductions of LCC and CO2 emissions over standard-based solutions. Moreover, utilizing intermittent heating is more effective than continuous heating in demonstrating the positive impacts of envelope renovation on increasing average temperature, decreasing temperature differences and lowering occupied time at low thermal comfort levels.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
License:

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.

  • About this
    data sheet
  • Reference-ID
    10712635
  • Published on:
    21/03/2023
  • Last updated on:
    10/05/2023
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine