Construction Stage Seismic Vulnerability Evaluation of a Continuous Girder Bridge with the Cast-in-Place Cantilever Construction Method

To evaluate the vulnerability of bridges at various construction stages under the action of strong earthquakes, the incremental dynamic analysis (IDA) method is applied, and the vulnerabilities of a continuous girder case study bridge with the cast-in-place cantilever construction method, which owns five main construction stages, are evaluated and compared. The results show the following: With the increase in the peak ground acceleration (PGA), the vulnerabilities of bridges at different construction stages all increase. The fragility and vulnerability are mainly determined by the structural mechanical system condition and the mode shapes but not the modal frequency. For the working condition of seismic PGA of 0.4 g, (1) the bridge at the substructure construction stage may only experience slight or moderate damage with the exceedance probability of 8% to 5% and the mean loss ratio being only about 5%; (2) the vulnerabilities of bridges at the middle cantilever construction stage and the long cantilever construction stage are similar, the collapse damage exceedance probability is about 80%, and the mean loss ratio is about 65%; and (3) the vulnerabilities of bridges at the middle span closure construction stage and the bridge completion construction stage are nearly the same, the collapse damage exceedance probability is about 98%, and the mean loss ratio can reach 80%. The research results explore a new method for evaluating the vulnerability of bridges at different construction stages, which can provide suggestions for seismic damage defense and seismic insurance risk evaluation.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.