Construction Simulation and Monitoring of the Jacking Steel Truss and Main Column of a Super High-Rise Building

To ensure that the steel truss used in a super high-rise building in Xi’an remains in a safe and reliable state during the construction and jacking process, the jacking steel truss and the main column are studied. A finite element model of the steel truss and the main column is established by using finite element software. The stress values of the steel truss and the main column under various working conditions are simulated, and the stress and perpendicularity of the key points of the structure are monitored via the stress monitoring system under different working conditions. Through the monitoring system, the data on the operation of the steel truss are collected, and the monitoring data are compared with the finite element simulation data to ensure the safe operation of the steel truss. The results indicate that the inclination angle of the main column is easily disturbed by the external environment. The main column is inclined in two directions, but it does not exceed 0.3°, indicating good verticality. The stress monitoring values are generally close to the simulated values. The peak values of the stress at the measuring points during the construction stage are the same as the results obtained from the field test, and the error between the measured maximum stress value and the simulated value is controlled within 10%. In general, the simulated values are in good agreement with the measured values.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.