A Calculation Method for Interconnected Timber Elements Using Wood-Wood Connections

Wood-wood connections, widely used in the past, have been progressively replaced by steel fasteners in timber constructions. Currently, they can be manufactured and implemented more efficiently thanks to digital fabrication techniques. In addition, with the emergence of new timber plate engineered products, digitally produced wood-wood connections have been developed with a strong focus on complex free-form geometries. The gained knowledge through research and building implementations have pushed the development of more standardized structural elements. As a result, this work presents a new concept of building components using through tenon connections based on the idea of transportable flat-packs directly delivered and assembled on site. The main objective of this research is to develop a convenient calculation model for practice that can capture the semi-rigid behavior of the connections and predict the effective bending stiffness of such structural elements. A case study is used as a reference with three large-scale slabs of a 8.1 m span. Bending and vibration tests are performed to study the mechanical behavior and assess the proposed calculation method. The results show the high influence of the semi-rigid behavior of connections on the bending properties and, therefore, on the serviceability limit state. The model is in good agreement with the test results, and further improvements can be made regarding the local behavior of the connection. This study demonstrates the feasibility of the proposed construction system and the applicability of the developed calculation model to design practice.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.