Bridge Structural Optimization Through Step-by-Step Evolutionary Process
Author(s): |
Tobia Zordan
Bruno Briseghella Enrico Mazzarolo |
---|---|
Medium: | journal article |
Language(s): | English |
Published in: | Structural Engineering International, February 2010, n. 1, v. 20 |
Page(s): | 72-78 |
DOI: | 10.2749/101686610791555586 |
Abstract: |
In this paper, the structural optimization process aiming to reduce the weight of the superstructure of a five span arch bridge, built in the Province of Venice-Italy and spanning the Piave river in the town of San DonĂ , has been presented. The original project, with a pre-stressed concrete superstructure, was re-considered during construction because of the following two unexpected events: first of all the approval of the new seismic National Regulation, occurred when the bridge was already partially built. As a result, existing foundations became unable to withstand the prescribed new seismic action. Furthermore, the Venice Water Authority, responsible for the management of the river spanned by the bridge, declared that erection phases without any provisional supports and scaffolding resting on the riverbed, as foreseen by the original project, should be preferred. Between the two possible identified design strategies able to deal with the mentioned problems, namely the strengthening of the foundations or the lightening of the superstructure, the second option was chosen, on the base of engineering judgement concerning the simplification of construction procedures, timing and budget. The search for the lightest possible solution, with the restraint given by the approved aesthetics of the original design and the need of not exceeding the former budget, brought to the conclusion that an evolutionary structural (ESO) optimization process could be suitably applied to a composite steel and concrete superstructure. |