The Behavior of a Coarse Granular Material under Complex Stress Conditions

In recent years, dozens of high rockfill dams are under construction or planning for hydropower exploration in western China. In dam construction, the mechanical behavior of coarse granular material greatly affects the compatible deformation of dam body. In this article, an indirect in situ density prediction approach for coarse granular material is firstly proposed to solve the technical obstacle on prediction of the material density in thick overburden layer of a dam site in southwest China. Adopting a self-developed large-scale true triaxial apparatus with a special friction-reduction technique, four series of true triaxial tests were then performed to investigate the behavior of a coarse granular material with a maximum particle diameter of 60 mm. Test results show that the peak strength of the material increases together with the increasing confining stress and the increasing intermediate principal stress ratio. The material dilatancy is restricted by both the confining stress and the intermediate principal stress ratio. With the increase in intermediate principal stress ratio, the internal friction angle increases firstly and then decreases slightly, but the slope of stress path reduces gradually. The tested peak states were compared with several well-known strength criteria under the framework of generalized stress, showing a good fitness with the Lade–Duncan criterion and underestimation by the Mohr–Coulomb criterion and the Matsuoka–Nakai criterion. The strength envelope in the π plane shrinks with the increasing confining stress.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.