Basic Study on the Proposal of New Measures to Improve the Ductility of RC Bridge Pier and Their Effectiveness

To enhance the seismic performance of reinforced concrete (RC) elements, it is essential to consider both strength and ductility post-yielding. This study proposed a novel method to improve the ductility of RC piers by using preformed inward-bending longitudinal reinforcements at the plastic hinges. Two full-scale model tests of standard and ductility-enhanced (DE) RC piers and numerical simulations were conducted. The lateral reversed cyclic loading experiments were conducted to assess the effectiveness of this new approach. The performance was evaluated regarding failure mode, plastic hinge distribution, hysteretic properties, normalized stiffness degradation, normalized energy dissipation capacity, bearing capacity, and ductility. Non-linear finite element method (FEM) analyses were also carried out to investigate the usefulness of the proposed method by DIANA, and simulation was validated against the experiment results by hysteretic curves, skeleton curves, failure mode crack pattern, ductility coefficient, and bearing capacity. The results indicated that the proposed method enhanced bearing capacity, resistance to stiffness degradation, energy dissipation capacity, and ductility. Additionally, it was observed that the preformed positions and curvature of the main steel bars influenced the plastic hinge location and the buckling of longitudinal reinforcements. FEM analysis revealed that it might be reasonable to deduce the other factors that influenced the ductility of the specimens by using the same material parameters and models.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.