Axial Compression Behavior of Wall-like Reinforced Concrete Columns Retrofitted Using Different FRP Schemes

Experimental and numerical investigations on the retrofitting of half-scale wall-like reinforced concrete (RC) columns were conducted. The axial compressive behavior of the control un-strengthened wall-like RC column (having a section aspect ratio of four) was compared with the strengthened columns. The columns were strengthened by employing external confinement through fiber-reinforced polymer (FRP) wraps and/or steel/FRP strips with/without modification of the column cross-section. The characteristics of axial load versus displacement and strain curves were discussed. The experimental results were also compared with the numerical models, which were first validated against the previous studies. A reasonably close agreement was achieved between the numerical and the test results with an error in prediction of less than 10% for the peak load. With the different schemes used for confinement, the enhancement in the load capacity of strengthened columns was in the range of 30–42% of the control column. In addition, significant ductility improvements were seen in schemes that employed the FRP wraps after shape modification.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.