0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Application of Steel-Fiber-Reinforced Self-Stressing Concrete in Prefabricated Pavement Joints

Author(s):







Medium: journal article
Language(s): English
Published in: Buildings, , n. 9, v. 13
Page(s): 2129
DOI: 10.3390/buildings13092129
Abstract:

Prefabricated pavement, with its advantages of a high paving speed, low material consumption, low carbon emissions, high strength, and easy construction, has gradually been used to address issues associated with traditional cement pavement construction. However, even under the long-term combined effects of vehicle loads and environmental loads, the joints between pavement slabs remain prone to various problems. This paper proposes the use of steel-fiber-reinforced self-stressing concrete (SFRSSC) with a certain level of self-stress for joint pouring and connection to control the development of cracks in the joints and achieve seamless integration between the slabs. Additionally, the self-stress generated by SFRSSC is utilized to enhance the continuity of the prestressed design in precast slabs, thereby extending their service life. Through laboratory experiments and field tests, the self-stress magnitude, mechanical strength, and long-term applicability of SFRSSC were studied. The results indicate that SFRSSC can achieve self-stress levels of over 7 MPa under standard curing conditions, but the values decrease significantly when removed from the standard curing environment. SFRSSC exhibits a compressive strength of over 60 MPa and a flexural strength of over 9 MPa, both of which exceed the requirements of the relevant standards, making it suitable for use as a pavement joint material. During long-term monitoring in the field, SFRSSC demonstrates favorable expansion effects and high stability. The longitudinal expansion remains stable at 100 με, while the transverse expansion exhibits minor shrinkage, maintained at around 25.2 με. Therefore, the application of SFRSSC in assembly-type prestressed pavement joints shows high applicability.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
License:

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.

  • About this
    data sheet
  • Reference-ID
    10737513
  • Published on:
    02/09/2023
  • Last updated on:
    14/09/2023
 
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine