Analysis of the Bearing Capacity of Concrete-Filled Thin-Walled Square Steel Tubes with Helical Stiffening Based on Local Buckling

To address the issue of local buckling in thin-walled steel tube concrete columns, a form of helical stiffening ribs was proposed. Axial compression tests were conducted on five sections of square steel tube concrete column specimens. The research revealed that, compared to ordinary steel tube concrete columns, the axial compression bearing capacity and deformation capacity of steel tube concrete columns with helical rib constraints increased by 18.5% and 7.7%, respectively. The helical ribs effectively enhanced the buckling resistance of the thin-walled steel tube concrete components. The failure pattern of this new type of component was characterized by diagonal cracks in the encased concrete aligning with the direction of the helical ribs, and the buckling of the steel tube walls was concentrated between the helical stiffening ribs. Based on the experiments, an analysis of the buckling performance of thin-walled steel tubes with helical rib constraints was conducted, and this was incorporated into the bearing capacity calculation. The test, simulation, and theoretical calculations showed that the bearing capacity error of the composite columns for each specimen was within 10%. Ultimately, a formula for the critical buckling bearing capacity of the helical rib steel tubes was proposed. The research findings provide a foundation for the engineering application of this new type of component.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.