내부앵커형 콘크리트 충전 기둥의 내력 및 변형능력에 관한 연구 (A Study on the Load Carrying Capacity and Deformation Capacity of the Internal Anchors Welded Cold Formed Concrete Filled Columns)
Author(s): |
Sun Hee Kim
Kong Soo Yom Sung Mo Choi |
---|---|
Medium: | journal article |
Language(s): | Korean |
Published in: | Journal of Korean Society of Steel Construction (한국강구조학회 논문집), August 2013, n. 4, v. 25 |
Page(s): | 347 |
DOI: | 10.7781/kjoss.2013.25.4.347 |
Abstract: | Recently, In recognition of outstanding structural performance the use of Concrete Filled steel Tube(CFT) columns has been increased. Research is ongoing that effective use of cross-sectional because steel strength development and rising prices. In this Lab, suggests new shape by Thin steel plates bent to be L-channel welded to form square steel tube to maximize efficiency of the cross section. In addition, since the rib placed at the center of the tube width acts as an anchor; higher load capacity of buckling is acceptable. we have developed New shape welded built-up square tube for broader usability which were bent to be L-shaped and thin Plate each unit member were welded. In order to apply the new shape built-up square columns, we predicted structure behavior, stress distribution with parameter Width thickness ratio. The experimental results presented in standards and even exceed the b/t of the rib anchors installed in the role due to exert enough strength and deformation to improve performance was favorable. |
- About this
data sheet - Reference-ID
10326459 - Published on:
22/07/2019 - Last updated on:
16/04/2023