Effect on Bed Material Heights to the Performance of ZCBAF in the Treatment of Micro-Polluted Raw Water
| Author(s): |
Jin Xiang Liu
Shui Bo Xie Chun Ning Cheng Jin Sheng Lou Shi You Li |
|---|---|
| Medium: | conference paper |
| Language(s): | English |
| Conference: | 2012 International Conference on Civil, Architectural and Hydraulic Engineering (ICCAHE 2012), August 10-12th 2012, Zhangjiajie (China) |
| Published in: | Sustainable Cities Development and Environment [3 vols] |
| Page(s): | 2053-2057 |
| DOI: | 10.4028/www.scientific.net/AMM.209-211.2053 |
| Abstract: |
The effect of bed material heights on treatment performance of pollutants from micro-polluted raw Water was studied in zeolite - Ceramics biological aerated filter(ZCBAF) technology. The test results showed the removal rate of CODMn, NH4+-N and UV254 will improve with the increase of media height, most of CODMn and UV254 were removed within the first 440mm, when the media height over 440mm, the effect of increase height is inconspicuous removal, and ammonia-nitrogen removal has evident improvement during 220-440mm. At the media height of 20mm, 40mm and 60mm in ZCBAF respectively, the removal efficiency of CODMn is 18.05%，31.6% and 38.62% respectively, NH4+-N removal efficiency is 29.78%,81.28% and 93.02% respectively, and UV254 removal efficiency is 7.81%，10.11% and 11.26% respectively under the air/water ratio of 1:1 and the hydraulic loading of 1.2m³/(m².h). Removal rate of CODMn was decreased with the increase of hydraulic loading, and removal effect of NH4+-N and UV254 had not big influence. |
- About this
data sheet - Reference-ID
10327379 - Published on:
24/07/2019 - Last updated on:
24/07/2019
