Radu Zmeureanu 
- : Comparing overheating risk and mitigation strategies for two Canadian schools by using building simulation calibrated with measured data. In: Journal of Building Performance Simulation.
- (2023): Life Cycle Assessment of the Environmental Benefits of Using Wood Products and Planting Trees at an All-Electric University Laboratory. In: Buildings, v. 13, n. 7 (28 June 2023).
- (2023): Feasibility of Planting Trees around Buildings as a Nature-Based Solution of Carbon Sequestration—An LCA Approach Using Two Case Studies. In: Buildings, v. 13, n. 1 (13 January 2023).
- (2023): Assessing and mitigating overheating risk in existing Canadian school buildings under extreme current and future climates. In: Energy and Buildings, v. 279 (January 2023).
- (2022): Do high energy-efficient buildings increase overheating risk in cold climates? Causes and mitigation measures required under recent and future climates. In: Building and Environment, v. 219 (July 2022).
- (2022): Calibration of building model based on indoor temperature for overheating assessment using genetic algorithm: Methodology, evaluation criteria, and case study. In: Building and Environment, v. 207 (January 2022).
- (2021): Evidence-based assessment of energy performance of two large centrifugal chillers over nine cooling seasons. In: Science and Technology for the Built Environment, v. 27, n. 9 (August 2021).
- (2016): Bottom-up evidence-based calibration of the HVAC air-side loop of a building energy model. In: Journal of Building Performance Simulation, v. 10, n. 1 (December 2016).
- (2014): A methodology for identifying the influence of design variations on building energy performance. In: Journal of Building Performance Simulation, v. 7, n. 6 (February 2014).
- (2013): Calibration of a central cooling plant model using manufacturer's data and measured input parameters and comparison with measured performance. In: Journal of Building Performance Simulation, v. 6, n. 2 (March 2013).
- (2020): Gray-box virtual sensor of the supply air temperature of air handling units. In: Science and Technology for the Built Environment, v. 26, n. 8 (July 2020).
- (2015): Development and validation of a solar-assisted heat pump using ice slurry as a latent storage material. In: Science and Technology for the Built Environment, v. 21, n. 6 (August 2015).
- (1987): Analytical and inter-program validation of a building thermal model. In: Energy and Buildings, v. 10, n. 2 (December 1987).
- (1991): Analysis of the energy performance of office buildings in Montreal in 1988. In: Energy and Buildings, v. 17, n. 1 ( 1991).
- (1999): Development of an energy rating system for existing houses. In: Energy and Buildings, v. 29, n. 2 (January 1999).
- (2008): Computer model of the airflow and thermal phenomena inside a large dome. In: Energy and Buildings, v. 40, n. 7 ( 2008).
- (2014): An empirical model of air displacement by revolving doors. In: Energy and Buildings, v. 70 (February 2014).
- (2020): 'Hybrid short-term forecasting of the electric demand of supply fans using machine learning. In: Journal of Building Engineering, v. 29 (May 2020).
- (2016): Experimental study on the flow characteristics of air curtains at building entrances. In: Building and Environment, v. 105 (August 2016).
- (2013): Exergy-based index for assessing the building sustainability. In: Building and Environment, v. 60 (February 2013).
- (2012): Experimental assessment of the velocity and temperature distribution in an indoor displacement ventilation jet. In: Building and Environment, v. 47 (January 2012).
- (2008): Comparison of environmental impacts of two residential heating systems. In: Building and Environment, v. 43, n. 6 (June 2008).
- (2005): Applying multi-objective genetic algorithms in green building design optimization. In: Building and Environment, v. 40, n. 11 (November 2005).
- (1998): A case study of validation of an energy analysis program: MICRO-DOE2.1E. In: Building and Environment, v. 33, n. 1 (January 1998).
- (1990): Assessment of the energy savings due to the building retrofit. In: Building and Environment, v. 25, n. 2 (January 1990).
- (2003): Life-Cycle Analysis of Improvements to an Existing Energy-Efficient House in Montreal. In: Architectural Science Review, v. 46, n. 4 (December 2003).
- (1995): A Case Study of Energy Savings by using the Water-Side Economiser System in a Large Office Building in Montreal. In: Architectural Science Review, v. 38, n. 1 (March 1995).
- (2013): Benchmarking model for the ongoing commissioning of the refrigeration systemof an indoor ice rink. In: Automation in Construction, v. 35 (November 2013).
- (2016): Automatic assisted calibration tool for coupling building automation system trend data with commissioning. In: Automation in Construction, v. 61 (January 2016).
- (1999): Evaluating Energy Impact of People's Behavior in a House: Case Study. In: Journal of Architectural Engineering (ASCE), v. 5, n. 3 (September 1999).
Structurae cooperates with
