Xuan Zhu 
- : Monitoring a mass timber—BRB braced mass timber frame under cyclic loading via acoustic emission. In: Structural Health Monitoring.
- (2024): Rheological Properties of Hot-Mix Asphalt during the Compaction Process Based on the Bodner–Partom Model. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 12 (December 2024).
- : Deep neural network based time–frequency decomposition for structural seismic responses training with synthetic samples. In: Computer-Aided Civil and Infrastructure Engineering.
- (2024): Surface Modification of Multiwalled Carbon Nanotube on the Performance of SBS Asphalt. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 5 (May 2024).
- (2024): Research on void characteristics during compaction of asphalt mixtures. In: Construction and Building Materials, v. 416 (February 2024).
- (2023): Two-dimensional acoustic emission source localization on layered engineered wood by machine learning: a case study of laminated veneer lumber plate structure. In: Structural Health Monitoring, v. 23, n. 4 (November 2023).
- (2023): Characterization and evaluation of coarse aggregate wearing morphology on mechanical properties of asphalt mixture. In: Construction and Building Materials, v. 388 (July 2023).
- (2023): Thermal response of the bridge supported longitudinal CRTS II slab track subject to diurnal temperature variation. In: Construction and Building Materials, v. 395 (September 2023).
- (2024): Unified Characterization of Rubber Asphalt Mixture Strength under Different Stress Loading Paths. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 1 (January 2024).
- (2023): Thermal performance of CRTS Ⅱ slab track-bridge structure under extreme temperatures: Numerical simulation. In: Construction and Building Materials, v. 377 (May 2023).
- (2023): Evaluation of asphalt mixture micromechanical behavior evolution in the failure process based on Discrete Element Method. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): Evaluation of Compaction Characteristics of Asphalt Mixture under Different Compaction Effects. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 6 (June 2023).
- (2023): Modification effects of multi-walled carbon nanotubes on the mechanical and rheological properties of epoxy asphalt. In: Construction and Building Materials, v. 369 (March 2023).
- (2023): Research on the characteristics of asphalt mixture gradation curve based on Weibull distribution. In: Construction and Building Materials, v. 366 (February 2023).
- (2023): The Fatigue-Creep Coupling Effect of Asphalt-Mixture Damage Model under Different Loading Frequencies. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 2 (February 2023).
- (2023): Research on strength and fatigue properties of asphalt mixture with different gradation curves. In: Construction and Building Materials, v. 364 (January 2023).
- (2022): Study on unified strength approach of asphalt mixture under different stress conditions. In: Construction and Building Materials, v. 357 (November 2022).
- (2022): The oil pollution and nitric oxide photocatalytic degradation evaluation of composite nanomaterials for asphalt pavement. In: Construction and Building Materials, v. 314 (January 2022).
- (2021): Investigation on strength characteristics of bio-asphalt mixtures based on the time–temperature equivalence principle. In: Construction and Building Materials, v. 309 (November 2021).
- (2022): Thermal evolution of CRTS Ⅱ slab track under various environmental temperatures: Experimental study. In: Construction and Building Materials, v. 325 (March 2022).
- (2022): Evaluation of coarse aggregate movement and contact unbalanced force during asphalt mixture compaction process based on discrete element method. In: Construction and Building Materials, v. 328 (April 2022).
- (2021): Evaluation of different modulus input on the mechanical responses of asphalt pavement based on field measurements. In: Construction and Building Materials, v. 312 (December 2021).
- (2017): Field Test Performance of Noncontact Ultrasonic Rail Inspection System. In: Journal of Transportation Engineering, Part A: Systems, v. 143, n. 5 (May 2017).
- (2012): A unified approach for the structural health monitoring of waveguides. In: Structural Health Monitoring, v. 11, n. 6 (July 2012).
- (2017): Solid waste collection/transport optimization and vegetation land cover estimation using Geographic Information System (GIS): A case study of a proposed smart-city. In: Sustainable Cities and Society, v. 35 (November 2017).
- (2020): Evaluation of phosphorus slag (PS) content and particle size on the performance modification effect of asphalt. In: Construction and Building Materials, v. 256 (September 2020).
- (2013): Guided waves for the health monitoring of sign support structures under varying environmental conditions. In: Structural Control and Health Monitoring, v. 20, n. 2 (February 2013).
- (2015): Three-dimensional temperature effect modelling of piezoceramic transducers used for Lamb wave based damage detection. In: Smart Materials and Structures, v. 24, n. 6 (June 2015).
- (2014): Sensor array for the health monitoring of truss structures by means of guided ultrasonic waves. In: Journal of Civil Structural Health Monitoring, v. 4, n. 3 (May 2014).
Structurae cooperates with
