Ying Zhou 
- : Automatic high-precision crack detection of post-earthquake structure based on self-supervised transfer learning method and SegCrackFormer. In: Structural Health Monitoring.
- : Deep learning-based three-dimensional crack damage detection method using point clouds without color information. In: Structural Health Monitoring.
- (2023): Assessment of seismic inelastic displacement profiles of steel MRFs by means of modal behavior factors. In: Soil Dynamics and Earthquake Engineering, v. 175 (December 2023).
- (2023): Bi-directional semi-active tuned mass damper for torsional asymmetric structural seismic response control. In: Engineering Structures, v. 294 (November 2023).
- (2022): Automatic generative design and optimization of hospital building layouts in consideration of public health emergency. In: Engineering, Construction and Architectural Management, v. 31, n. 4 (December 2022).
- (2022): Design recommendations for self-centering buckling restrained braces. In: Engineering Structures, v. 273 (December 2022).
- (2022): Data Set for a Shake-Table Test of a 2-Story Low-Damage Concrete Wall Building. In: Journal of Structural Engineering (ASCE), v. 148, n. 7 (July 2022).
- (2022): Automated Selection and Localization of Mobile Cranes in Construction Planning. In: Buildings, v. 12, n. 5 (24 April 2022).
- (2022): Adaptive-passive tuned mass damper for structural aseismic protection including soil–structure interaction. In: Soil Dynamics and Earthquake Engineering, v. 158 (July 2022).
- (2022): Design of multiphase auxetic metamaterials by a parametric color level set method. In: Composite Structures, v. 287 (May 2022).
- (2021): Automated lift planning methods for mobile cranes. In: Automation in Construction, v. 132 (December 2021).
- (2021): A displacement-based seismic design method for building structures with nonlinear viscoelastic dampers. In: Bulletin of Earthquake Engineering, v. 19, n. 11 (June 2021).
- (2021): Assessment of city sustainability from the perspective of multi-source data-driven. In: Sustainable Cities and Society, v. 70 (July 2021).
- (2020): Assessment of coordinated development between social economy and ecological environment: Case study of resource-based cities in Northeastern China. In: Sustainable Cities and Society, v. 59 (August 2020).
- (2007): An applied model for steel reinforced concrete columns. In: Structural Engineering and Mechanics, v. 27, n. 6 (December 2007).
- (2021): Comparative study of outdoor airflow requirement and distribution in multi-zone VAV system with different control strategies. In: Science and Technology for the Built Environment, v. 27, n. 4 (January 2021).
- (2020): A CAD-oriented structural topology optimization method. In: Computers & Structures, v. 239 (October 2020).
- (2020): Design and automated assembly of Planetary LEGO Brick for lunar in-situ construction. In: Automation in Construction, v. 118 (October 2020).
- (2019): Analytical and Numerical Investigation of Quasi-Zero Stiffness Vertical Isolation System. In: Journal of Engineering Mechanics (ASCE), v. 145, n. 6 (June 2019).
- (2015): An Area-based Intensity Measure for Incremental Dynamic Analysis. In: Journal of Asian Architecture and Building Engineering, v. 14, n. 2 (May 2015).
- (2014): Deformation Capacity and Performance-Based Seismic Design for Reinforced Concrete Shear Walls. In: Journal of Asian Architecture and Building Engineering, v. 13, n. 1 (January 2014).
- (2014): Deformation Capacity and Performance-Based Seismic Design for Reinforced Concrete Coupling Beams. In: Journal of Asian Architecture and Building Engineering, v. 13, n. 1 (January 2014).
- (2018): An alternative practical design method for structures with viscoelastic dampers. In: Earthquake Engineering and Engineering Vibration, v. 17, n. 3 (July 2018).
- (2019): An adaptive‐passive retuning device for a pendulum tuned mass damper considering mass uncertainty and optimum frequency. In: Structural Control and Health Monitoring, v. 26, n. 7 (May 2019).
- (2019): Collapse fragility analysis of self-centering precast concrete walls with different post-tensioning and energy dissipation designs. In: Bulletin of Earthquake Engineering, v. 17, n. 6 (April 2019).
- (2014): Building Information Modeling (BIM) application framework: The process of expanding from 3D to computable nD. In: Automation in Construction, v. 46 (October 2014).
- (2015): Applicability of 4D modeling for resource allocation in mega liquefied natural gas plant construction. In: Automation in Construction, v. 50 (February 2015).
- (2018): Discrete element method-based collapse simulation, validation and application to frame structures. In: Structure and Infrastructure Engineering, v. 14, n. 5 (November 2018).
- (2017): The area-based intensity measure for incremental dynamic analysis under two-dimensional ground motion input. In: The Structural Design of Tall and Special Buildings, v. 26, n. 12 (25 August 2017).
- (2014): Analysis of a high-rise steel structure with viscous damped outriggers. In: The Structural Design of Tall and Special Buildings, v. 23, n. 13 (September 2014).
Structurae cooperates with
