Xiangming Zhou 
- (2024): Impact of Cl- on the performance of magnesium oxysulfate (MOS) cement. In: Construction and Building Materials, v. 430 (June 2024).
- (2024): Phase and microstructure evolution of the hydration products of magnesium phosphate cements under sulfuric acid environments. In: Construction and Building Materials, v. 418 (March 2024).
- (2024): Performance of cementitious materials prepared with magnesium slag and concrete slurry waste. In: Journal of Building Engineering, v. 89 (July 2024).
- (2023): Properties and microstructures of 3D printable sulphoaluminate cement concrete containing industrial by-products and nano clay. In: Journal of Building Engineering, v. 73 (August 2023).
- (2023): Performance buildup of reactive magnesia cement (RMC) formulation via using CO2-strengthened recycled concrete aggregates (RCA). In: Journal of Building Engineering, v. 65 (April 2023).
- (2023): Performance of magnesium oxysulfate (MOS) cement with granite powders after combined sulfate and chloride attacks. In: Construction and Building Materials, v. 366 (February 2023).
- (2023): Milled Waste Glass Powder in Magnesium-Silicate-Hydrate Cement: Technical and Environmental Assessment. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 1 (January 2023).
- (2022): Prediction on Crack Propagation of Concrete due to Time-Dependent Creep under High Sustained Loading. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 2 (February 2022).
- (2010): Numerical simulation of ram extrusion in short-fiber-reinforced fresh cementitious composites. In: Journal of Mechanics of Materials and Structures, v. 4, n. 10 (February 2010).
- (2019): Pore structure evolution and strength development of hardened cement paste with super low water-to-cement ratios. In: Construction and Building Materials, v. 227 (December 2019).
- (2016): Fracture Mechanisms of Rock-Concrete Interface: Experimental and Numerical. In: Journal of Engineering Mechanics (ASCE), v. 142, n. 7 (July 2016).
- (2007): Numerical Simulations of Upsetting Process of the Fresh Fiber-Cement Paste. In: Journal of Engineering Mechanics (ASCE), v. 133, n. 11 (November 2007).
- (2007): Multi-hazard performance assessment of a transfer-plate high-rise building. In: Earthquake Engineering and Engineering Vibration, v. 6, n. 4 (December 2007).
- (2019): Influence of specimen geometries and drying conditions on concrete cracking in restrained elliptical ring tests. In: Construction and Building Materials, v. 207 (May 2019).
- (2019): Lightweight Alkali-Activated Material from Mining and Glass Waste by Chemical and Physical Foaming. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 3 (March 2019).
- (2015): Manufacturing cement-based materials and building products via extrusion: from laboratory to factory. In: Proceedings of the Institution of Civil Engineers - Civil Engineering, v. 168, n. 6 (November 2015).
- (2012): Light-weight wood–magnesium oxychloride cement composite building products made by extrusion. In: Construction and Building Materials, v. 27 (February 2012).
- (2013): Multifunctional properties of carbon nanotube/fly ash geopolymeric nanocomposites. In: Construction and Building Materials, v. 49 (December 2013).
- (2013): On fracture process zone and crack extension resistance of concrete based on initial fracture toughness. In: Construction and Building Materials, v. 49 (December 2013).
- (2016): Influence of paste thickness on coated aggregates on properties of high-density sulphoaluminate cement concrete. In: Construction and Building Materials, v. 115 (July 2016).
- (2016): Experimental study of equal biaxial-to-uniaxial compressive strength ratio of concrete at early ages. In: Construction and Building Materials, v. 126 (November 2016).
- (2016): Experimental studies on void detection in concrete-filled steel tubes using ultrasound. In: Construction and Building Materials, v. 128 (December 2016).
- (2017): Flexural behavior of basalt FRP reinforced ECC and concrete beams. In: Construction and Building Materials, v. 142 (July 2017).
- (2017): Investigating crack initiation and propagation of concrete in restrained shrinkage circular/elliptical ring test. In: Materials and Structures, v. 50, n. 1 (February 2017).
- (2013): A macro-element based practical model for seismic analysis of steel–concrete composite high-rise buildings. In: Engineering Structures, v. 49 (April 2013).
- (2014): Graphene/fly ash geopolymeric composites as self-sensing structural materials. In: Smart Materials and Structures, v. 23, n. 6 (June 2014).
- (2015): Finite-Element Analysis of Shear-Off Failure of Keyed Dry Joints in Precast Concrete Segmental Bridges. In: Journal of Bridge Engineering (ASCE), v. 20, n. 6 (June 2015).
- (2017): Numerical Analysis of Shear-Off Failure of Keyed Epoxied Joints in Precast Concrete Segmental Bridges. In: Journal of Bridge Engineering (ASCE), v. 22, n. 1 (January 2017).
- (2017): Preparation Conditions for the Synthesis of Alkali-Activated Binders Using Tungsten Mining Waste. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 10 (October 2017).
- (2004): Fiber-Cement Extrudates with Perlite Subjected to High Temperatures. In: Journal of Materials in Civil Engineering (ASCE), v. 16, n. 3 (June 2004).
Structurae cooperates with
