Mingkai Zhou
- (2023): Design of Anti-blocking and Anti-seepage shield grouting materials and their performance enhancement mechanism analysis. In: Construction and Building Materials, v. 394 (August 2023).
- (2023): Effects of GGBFS:FA ratio and humid-heat-treating on the mechanical performance and microstructure of the steel slag-based ternary geopolymer. In: Construction and Building Materials, v. 392 (August 2023).
- (2022): Modification of phosphogypsum using circulating fluidized bed fly ash and carbide slag for use as cement retarder. In: Construction and Building Materials, v. 338 (July 2022).
- (2022): Investigation on strength and failure behavior of ceramic foams prepared from silicoaluminous industrial waste under uniaxial compression. In: Construction and Building Materials, v. 317 (January 2022).
- (2022): Occurrence and migration laws of water in circulating fluidized bed bottom slag mortar and their influences on mortar properties. In: Construction and Building Materials, v. 315 (January 2022).
- (2021): Study on the mechanical properties and microstructure of chitosan reinforced metakaolin-based geopolymer. In: Construction and Building Materials, v. 271 (February 2021).
- (2020): Influence of size and surface condition of distributing-filling coarse aggregate on the properties of aggregate-interlocking concrete. In: Construction and Building Materials, v. 261 (November 2020).
- (2020): Study on hydration characteristics of circulating fluidized bed combustion fly ash (CFBCA). In: Construction and Building Materials, v. 251 (August 2020).
- (2020): Design of a chitosan modifying alkali-activated slag pervious concrete with the function of water purification. In: Construction and Building Materials, v. 251 (August 2020).
- (2020): Coupled effects of the content and methylene blue value (MBV) of microfines on the performance of manufactured sand concrete. In: Construction and Building Materials, v. 240 (April 2020).
- (2018): Effect of Organic Polymers on the Properties of Slag-based Geopolymers. In: Construction and Building Materials, v. 167 (April 2018).
- (2020): Utilization of limestone powder and fly ash in blended cement: Rheology, strength and hydration characteristics. In: Construction and Building Materials, v. 232 (January 2020).
- (2019): Investigation on the preparation and performance of clinker-fly ash-gypsum road base course binder. In: Construction and Building Materials, v. 212 (July 2019).
- (2007): Study on lime–fly ash–phosphogypsum binder. In: Construction and Building Materials, v. 21, n. 7 (July 2007).
- (2009): Effect of limestone fines content in manufactured sand on durability of low- and high-strength concretes. In: Construction and Building Materials, v. 23, n. 8 (August 2009).
- (2010): Experimental investigation on aggregate interlocking concrete prepared with scattering–filling coarse aggregate process. In: Construction and Building Materials, v. 24, n. 11 (November 2010).
- (2011): Influence of manufactured sand characteristics on strength and abrasion resistance of pavement cement concrete. In: Construction and Building Materials, v. 25, n. 10 (October 2011).
- (2014): Mechanical performance evaluation of polyester fiber and SBR latex compound-modified cement concrete road overlay material. In: Construction and Building Materials, v. 63 (July 2014).
- (2016): Properties comparison of mortars with welan gum or cellulose ether. In: Construction and Building Materials, v. 102 (January 2016).
- (2010): Investigation on the scattering-filling coarse aggregate self-consolidating concrete. In: Materials and Structures, v. 43, n. 10 (December 2010).
- (2018): Mechanical properties and microstructure of metakaolin-based geopolymer compound-modified by polyacrylic emulsion and polypropylene fibers. In: Construction and Building Materials, v. 190 (November 2018).
Structurae cooperates with
