Jianting Zhou 
- (2024): Experimental study on infrared detection of debonding in concrete-filled steel tubular structure under acceleratory period of hydration heat action. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Explainable machine learning model for load-deformation correlation in long-span suspension bridges using XGBoost-SHAP. In: Developments in the Built Environment, v. 20 (December 2024).
- (2024): Fatigue life prediction of corroded steel wires: An accurate and explainable data-driven approach. In: Construction and Building Materials, v. 450 (November 2024).
- (2024): Circumferential multi-point corrosion status assessment of steel cables considering self-magnetic flux leakage superposition effect. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Damage evolution and residual shear resistance of toughness-improved UHPC-NSC interface under high-stress level of fatigue shear loading. In: Construction and Building Materials, v. 430 (June 2024).
- (2024): Evaluating the performance of masonry arch strengthened with UHPC at extrados and intrados by experimental, numerical and analytical approaches. In: Structures, v. 65 (July 2024).
- (2024): Cooling-excited infrared thermography for enhancing the detection of concrete filled steel tube interfacial debonding at concrete hydration. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Computer vision-based real-time continuous monitoring of the pose for large-span bridge cable lifting structures. In: Automation in Construction, v. 162 (June 2024).
- (2024): Effects of tribological and material properties of wire rope on the motion synchronization of a precision flexible transmission device. In: Structures, v. 63 (May 2024).
- (2024): Experimental Study on Transverse Seismic Behavior of Long-Span Cable-Stayed Bridge with Two Inverted Y-Shaped Reinforced Concrete Towers. In: Journal of Earthquake Engineering, v. 28, n. 9 (February 2024).
- : Dynamic response recovery of damaged structures using residual learning enhanced fully convolutional network. In: International Journal of Structural Stability and Dynamics.
- (2024): Experimental investigation and calculation method of the interfacial bonding performance of stone masonry reinforced with UHPC. In: Journal of Building Engineering, v. 85 (May 2024).
- (2023): Early-age shrinkage characteristic of UHPC in strengthening stone masonry arch: Influence of restraint from arch structure. In: Structures, v. 58 (December 2023).
- (2024): Characterization and grading assessment of rebar corrosion in loaded RC beams via SMFL technology. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Coupling dual nonlinearity of arch bridge bearing capacity analysis method. In: International Journal of Structural Stability and Dynamics, v. 23, n. 16-18 (November 2023).
- (2023): Experimental and numerical investigations on force transfer mechanism of steel-concrete joint in hybrid girder bridges. In: Structures, v. 54 (August 2023).
- (2023): Experimental study on the ultimate bearing capacity of damaged RC arches strengthened with ultra-high performance concrete. In: Engineering Structures, v. 279 (March 2023).
- (2022): Combining active and passive wind tunnel tests to determine the aerodynamic admittances of a bridge girder. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 231 (December 2022).
- (2022): Aerodynamic Forces on a Bluff Cylinder in Sinusoidal Streamwise Winds with Different Angles of Attack. In: Buildings, v. 12, n. 7 (5 July 2022).
- (2022): Detection and quantitative evaluation of elastic stress state of reinforcements in RC beams based on magnetic signal characteristics. In: Construction and Building Materials, v. 344 (August 2022).
- (2022): Experimental and numerical investigations on the mechanical behavior of reinforced concrete arches strengthened with UHPC subjected to asymmetric load. In: Structures, v. 39 (May 2022).
- (2022): Bridge deformation prediction based on SHM data using improved VMD and conditional KDE. In: Engineering Structures, v. 261 (June 2022).
- (2021): Design and Experiment of an Automatic Temperature Control Device of Composite Shape-Stabilized Phase Change Material for Concrete Box Bridges. In: KSCE Journal of Civil Engineering, v. 26, n. 2 (December 2021).
- (2019): Design and Practice of Structural Health Monitoring System for Large Span Urban Rail Transit Bridge Based on Internet of Things. Presented at: IABSE Congress: The Evolving Metropolis, New York, NY, USA, 4-6 September 2019.
- (2020): Experiment on the Segment Model of a Plain Concrete Arch Bridge Reinforced with UHPC Composite Arch Circle. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Cracking characteristics and pore development in concrete due to physical attack. In: Materials and Structures, v. 53, n. 4 (26 June 2020).
- (2020): Autoregressive Model-Based Structural Damage Identification and Localization Using Convolutional Neural Networks. In: KSCE Journal of Civil Engineering, v. 24, n. 7 (June 2020).
- (2019): Experimental Study on Corrosion of Unstressed Steel Strand based on Metal Magnetic Memory. In: KSCE Journal of Civil Engineering, v. 23, n. 3 (January 2019).
- (2019): Experimental analysis of the correlation between bending strength and SMFL of corroded RC beams. In: Construction and Building Materials, v. 214 (July 2019).
- (2018): Experimental Research on Fatigue Damage of Reinforced Concrete Rectangular Beam. In: KSCE Journal of Civil Engineering, v. 22, n. 9 (April 2018).
Structurae cooperates with
