Fulin Zhou
- (2024): Enhanced wear resistance of 304 stainless steel by an improved method based on ultrasonic strengthening grinding process and PTFE coating. In: Construction and Building Materials, v. 431 (June 2024).
- (2024): Preliminary design and evaluation method for the seismic isolation layer of a shield tunnel. In: Computers and Geotechnics, v. 167 (March 2024).
- (2024): Experimental investigation of steel-reinforced precast shear wall with replaceable energy dissipators. In: Engineering Structures, v. 306 (May 2024).
- (2024): Investigating on the longitudinal seismic response and deformation mechanism of a long tunnel under the combined action of the traveling wave effect and mutation of the soil layer. In: Structures, v. 63 (May 2024).
- (2024): Deep reinforcement learning‐based active mass driver decoupled control framework considering control–structure interaction effects. In: Computer-Aided Civil and Infrastructure Engineering, v. 39, n. 11 (21 May 2024).
- (2024): A hybrid buckling-restrained brace for enhancing the seismic performance of steel moment resisting frames. In: Soil Dynamics and Earthquake Engineering, v. 178 (March 2024).
- (2024): Experimental investigation of innovative modular bidirectional load-bearing and energy-dissipating joints for high-rise modular constructions. In: Journal of Building Engineering, v. 85 (May 2024).
- (2023): Improved analytic method for outrigger structures considering floor stiffness. In: The Structural Design of Tall and Special Buildings, v. 33, n. 5 (December 2023).
- (2024): The effect of an improved passive bumper on the seismic response of the base-isolated structure: Numerical simulations and optimization design. In: Soil Dynamics and Earthquake Engineering, v. 176 (January 2024).
- (2023): Improved three-variable control for electromagnetic mass damper system considering control-structure interaction. In: International Journal of Structural Stability and Dynamics, v. 23, n. 19 (March 2023).
- (2023): A composite control scheme for electromagnetic active mass damper against control-structure-interaction effects. In: Engineering Structures, v. 281 (April 2023).
- (2023): Experimental study of magnetic bistable nonlinear energy sink for structural seismic control. In: Soil Dynamics and Earthquake Engineering, v. 164 (January 2023).
- (2022): Enhancing the Seismic Resilience of Steel Moment Resisting Frame with a New Precast Self-Centering Rocking Shear Wall System. In: Buildings, v. 12, n. 11 (27 October 2022).
- (2022): Endurance time analysis of seismic performances of long-span continuous rigid-frame bridges with corrugated steel webs. In: Structures, v. 43 (September 2022).
- (2022): New precast self-centering rocking shear wall with multiple hinged joints: Description and design approach for seismic protection of buildings. In: Engineering Structures, v. 262 (July 2022).
- (2021): Dynamic testing and numerical simulation of human-induced vibration of cantilevered floor with tuned mass dampers. In: Structures, v. 34 (December 2021).
- (2021): Acceleration‐based sliding mode hierarchical control algorithm for shake table tests. In: Earthquake Engineering and Structural Dynamics, v. 50, n. 13 (25 October 2021).
- (2021): A new nonlinear model to describe the degradation law of the mechanical properties of lead‐rubber bearings under high‐speed horizontal loading. In: Structural Control and Health Monitoring, v. 28, n. 12 (September 2021).
- (2021): Evaluation of optimal FVDs for inter-storey isolation systems based on surrogate performance models. In: Bulletin of Earthquake Engineering, v. 19, n. 11 (June 2021).
- (1997): Dynamic response of a high-rise SRC building model. Presented at: International Conference: Composite Construction - Conventional and Innovative, Innsbruck, Austria, 16-18 September 1997.
- (2019): Dynamic Analysis of Nonclassically Damped Systems with Linear Behavior Using Load-Dependent Ritz Vectors. In: International Journal of Structural Stability and Dynamics, v. 19, n. 3 (March 2019).
- (2007): Cursory seismic drift assessment for buildings in moderate seismicity regions. In: Earthquake Engineering and Engineering Vibration, v. 6, n. 1 (March 2007).
- (2012): Dynamic performance analysis of a seismically isolated bridge under braking force. In: Earthquake Engineering and Engineering Vibration, v. 11, n. 1 (March 2012).
- (2014): Dynamic characteristics of a novel damped outrigger system. In: Earthquake Engineering and Engineering Vibration, v. 13, n. 2 (May 2014).
- (2019): Experimental research on the time-varying law of performance for natural rubber laminated bearings subjected to seawater dry-wet cycles. In: Engineering Structures, v. 195 (September 2019).
- (2019): Optimization of damped outrigger systems subject to stochastic excitation. In: Engineering Structures, v. 191 (July 2019).
- (2017): An improved response spectrum method for non-classically damped systems. In: Bulletin of Earthquake Engineering, v. 15, n. 10 (March 2017).
- (2011): Experimental Study on Fire Resistance of Building Seismic Rubber Bearings. In: Journal of Structural Engineering (ASCE), v. 137, n. 12 (December 2011).
- (2018): novel energy dissipation outrigger system with rotational inertia damper. In: Advances in Structural Engineering, v. 21, n. 12 (March 2018).
- (2017): The Experimental investigation of mega-sub isolation structure. In: The Structural Design of Tall and Special Buildings, v. 26, n. 16 (November 2017).
Structurae cooperates with
