Jian-Jun Zheng
- (2024): Passive stress-strain model and ultimate strength prediction for short steel tube confined concrete (STCC) columns allowing for size effect. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): Numerical modeling of microstructure development and chloride diffusion coefficient of cement paste with ellipsoidal particles. In: Construction and Building Materials, v. 408 (December 2023).
- (2023): Numerical Investigation of Fire-Induced Spalling of Normal Strength Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 10 (October 2023).
- (2014): A meso-level investigation into the explosive spalling mechanism of high-performance concrete under fire exposure. In: Cement and Concrete Research, v. 65 (November 2014).
- (2009): Assessing the influence of ITZ on the steady-state chloride diffusivity of concrete using a numerical model. In: Cement and Concrete Research, v. 39, n. 9 (September 2009).
- (2023): Bond of Plain Bars in Early-Age Concrete under Bilateral Pressures. In: ACI Structural Journal, v. 120, n. 3 ( 2023).
- (2023): Bond performance of ribbed bars in concrete: Effects of loading rate and lateral tension. In: Magazine of Concrete Research, v. 75, n. 8 (April 2023).
- (2022): A multi-step scheme for evaluating the elastic moduli of partially leached cement paste. In: Construction and Building Materials, v. 344 (August 2022).
- (2022): Experimental investigation and numerical simulation for chloride diffusivity of cement paste with elliptical cement particles. In: Construction and Building Materials, v. 337 (June 2022).
- (2021): Closed-Form Solution of the Ductility of Short FRP-Wrapped Rectangular Concrete Prisms under Eccentric Loads. In: Journal of Composites for Construction, v. 25, n. 5 (October 2021).
- (2021): A passive stress-strain model for concrete prisms reinforced by a combination of confinement reinforcement. In: Engineering Structures, v. 246 (November 2021).
- (2023): Analysis of time-dependent chloride diffusion in surface-treated concrete based on a rapid numerical approach. In: Structure and Infrastructure Engineering, v. 19, n. 3 (October 2023).
- (2018): A numerical algorithm for evaluating the chloride diffusion coefficient of concrete with crushed aggregates. In: Construction and Building Materials, v. 171 (May 2018).
- (2016): Fracture Analysis of FRP-Plated Notched Concrete Beams Subjected to Three-Point Bending. In: Journal of Engineering Mechanics (ASCE), v. 142, n. 3 (March 2016).
- (2012): Prediction of Thermal Decomposition of Hardened Cement Paste. In: Journal of Materials in Civil Engineering (ASCE), v. 24, n. 5 (May 2012).
- (2011): Application of improved hybrid bonded FRP technique to FRP debonding prevention. In: Construction and Building Materials, v. 25, n. 6 (June 2011).
- (2012): A numerical method for the chloride diffusivity in concrete with aggregate shape effect. In: Construction and Building Materials, v. 31 (June 2012).
- (2013): Effective medium method for predicting the chloride diffusivity in concrete with ITZ percolation effect. In: Construction and Building Materials, v. 47 (October 2013).
- (2014): Bond behavior of plain round bars embedded in concrete subjected to lateral tension. In: Construction and Building Materials, v. 54 (March 2014).
- (2014): A numerical method for predicting Young's modulus of heated cement paste. In: Construction and Building Materials, v. 54 (March 2014).
- (2014): Analytical solution for the full-range pull-out behavior of FRP ground anchors. In: Construction and Building Materials, v. 58 (May 2014).
- (2016): A Brownian motion simulation for the chloride diffusivity of concrete. In: Construction and Building Materials, v. 122 (September 2016).
- (2017): Numerical analysis of heating rate effect on spalling of high-performance concrete under high temperature conditions. In: Construction and Building Materials, v. 152 (October 2017).
- (2017): Spalling and cracking modelling of high-performance concrete exposed to elevated temperatures. In: Magazine of Concrete Research, v. 69, n. 24 (December 2017).
- (2014): An analytical method for determining the crack extension resistance curve of concrete. In: Magazine of Concrete Research, v. 66, n. 14 (July 2014).
- (2013): An experimental study on the performance of self-compacting lightweight concrete exposed to elevated temperature. In: Magazine of Concrete Research, v. 65, n. 13 (July 2013).
- (2011): Improved hybrid bonding technique for attaching FRP to reinforced concrete beams. In: Magazine of Concrete Research, v. 63, n. 11 (November 2011).
- (2015): Multi-angle truss model for predicting the shear deformation of RC beams with low span-effective depth ratios. In: Engineering Structures, v. 91 (May 2015).
- (2014): Prediction of the nonlinear pull-out response of FRP ground anchors using an analytical transfer matrix method. In: Engineering Structures, v. 81 (December 2014).
- (2019): Three-dimensional analytical model for the pull-out response of anchor-mortar-concrete anchorage system based on interfacial bond failure. In: Engineering Structures, v. 180 (February 2019).
Structurae cooperates with
