Zedi Zhang
- (2024): Specimen size effect on compressive strength of 3D printed concrete containing coarse aggregate with varying water to binder ratios. In: Journal of Building Engineering, v. 97 (November 2024).
- (2025): Printing large size eggshell-shaped elements with ultra-high-performance concrete: From material design to structural bearing capacity assessment. In: Construction and Building Materials, v. 462 (February 2025).
- (2024): The positive role of phosphogypsum in dredged sediment solidified with alkali-activated slag. In: Construction and Building Materials, v. 442 (September 2024).
- (2024): Understanding the dynamic rheological property of cement paste blended with steel slag powder: From interparticle force and physico-chemical parameters of view. In: Construction and Building Materials, v. 422 (April 2024).
- (2024): Effect of recycled brick powder with various particle features on early-age hydration, water state, and rheological properties of blended cement paste in the context of 3D Printing. In: Construction and Building Materials, v. 418 (March 2024).
- (2024): Early-age inhomogeneous deformation of 3D printed concrete: Characteristics and influences of superplasticizer and water-binder ratio. In: Journal of Building Engineering, v. 86 (June 2024).
- (2024): Exploring the potential for carrying capacity and reusability of 3D printed concrete bridges: Construction, dismantlement, and reconstruction of a box arch bridge. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Uncovering the influence of red mud on foam stability and pore features in hybrid alkali-activated foamed concrete. In: Construction and Building Materials, v. 416 (February 2024).
- (2023): Influences of the joint action of sulfate erosion and cementitious capillary crystalline waterproofing materials on the hydration products and properties of cement-based materials: A review. In: Journal of Building Engineering, v. 68 (June 2023).
- (2022): Study of the influence of sand on rheological properties, bubble features and buildability of fresh foamed concrete for 3D printing. In: Construction and Building Materials, v. 356 (November 2022).
- (2022): Pore structure, internal relative humidity, and fiber orientation of 3D printed concrete with polypropylene fiber and their relation with shrinkage. In: Journal of Building Engineering, v. 61 (December 2022).
- (2022): Development of a new magnesium oxychloride cement board by recycling of waste wood, rice husk ash and flue gas desulfurization gypsum. In: Journal of Building Engineering, v. 61 (December 2022).
- (2022): Bond behavior between steel bars and 3D printed concrete: Effect of concrete rheological property, steel bar diameter and paste coating. In: Construction and Building Materials, v. 349 (September 2022).
- (2022): Understanding the effects of mix proportion parameters on the dynamic stability of ground limestone mortar based on the velocity of particle and paste film thickness. In: Construction and Building Materials, v. 330 (May 2022).
- (2021): Action mechanism of rice husk ash and the effect on main performances of cement-based materials: A review. In: Construction and Building Materials, v. 288 (June 2021).
- (2022): Effects of CCCW on properties of cement-based materials: A review. In: Journal of Building Engineering, v. 50 (June 2022).
- (2022): Mechanical anisotropy evolution of 3D-printed alkali-activated materials with different GGBFS/FA combinations. In: Journal of Building Engineering, v. 50 (June 2022).
- (2021): A state-of-the-art review on the stability of self-consolidating concrete. In: Construction and Building Materials, v. 268 (January 2021).
- (2020): Study on the structural build-up of cement-ground limestone pastes and its micro-mechanism. In: Construction and Building Materials, v. 263 (December 2020).
- (2020): Effect of particle size distribution on flocculation and its growth in cement-ground limestone suspensions. In: Construction and Building Materials, v. 262 (November 2020).
Structurae cooperates with
