Yang Zhang 
- (2024): Research on leaching kinetics and reactivity evaluation of copper tailings as precursor for alkali-activated materials. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): A partial decomposition cutting method with CF-discrepancy for points selection in stochastic seismic analysis of structures. In: Structural Safety, v. 111 (November 2024).
- (2024): Rheological analysis and chemical characterization of bio-rejuvenated laboratory-aged binders using partially epoxidized soybean oil with various epoxy values. In: Construction and Building Materials, v. 432 (June 2024).
- (2024): Seismic performance verification and theoretical stiffness calculation for a novel assembled concrete dry-connected beam-column node. In: Structures, v. 63 (May 2024).
- (2024): Rebound Characteristics of Wet-Shotcrete Particle Flow Jet from Wall Based on CFD-DEM. In: Buildings, v. 14, n. 4 (27 March 2024).
- (2024): Performance improvement of vapor compression heat pump with superhydrophobic finned-tube evaporator. In: Journal of Building Engineering, v. 87 (June 2024).
- (2023): Predicting asphalt mixture fatigue life via four-point bending tests based on viscoelastic continuum damage mechanics. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2024): Performance evaluation of rapeseed oil-based derivatives modified hard asphalt binders: Towards greener and more sustainable asphalt additives. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Optimal humidity-responsive actuators of heterostructured MXene nanosheets/3D-MXene membrane. In: Smart Materials and Structures, v. 32, n. 6 (21 April 2023).
- (2020): Prediction of tensile response of UHPC with aligned and ZnPh treated steel fibers based on a spatial stochastic process. In: Cement and Concrete Research, v. 136 (October 2020).
- (2023): Safety Monitoring and Effect Evaluation of Variable Cross-Section Continuous Box-Girder Bridges Strengthened with External Prestressing. In: Journal of Performance of Constructed Facilities (ASCE), v. 37, n. 2 (April 2023).
- (2023): Shear behavior of full-scale prestressed concrete double tee beams with steel-wire meshes. In: Journal of Building Engineering, v. 64 (April 2023).
- (2022): Research on thermal actuation performance of twisted and coiled nylon artificial muscles based on yarn mechanics. In: Smart Materials and Structures, v. 32, n. 1 (2 December 2022).
- (2023): Performance improvement and demand-oriented optimum design of the tuned negative stiffness inerter damper for base-isolated structures. In: Journal of Building Engineering, v. 63 (January 2023).
- (2022): Probabilistic Multi-Objective Inverse Analysis for Damage Identification Using Piezoelectric Impedance Measurement Under Uncertainties. In: Frontiers in Built Environment, v. 8 (February 2022).
- (2022): Preparation of reinforced geopolymer matrix by centrifugation. In: Construction and Building Materials, v. 326 (April 2022).
- (2020): Squeezing deformation control during bench excavation for the Jinping deep soft-rock tunnel. In: Engineering Failure Analysis, v. 116 (October 2020).
- (2021): Parametric study on module wall-core system of concrete modular high-rises considering the influence of vertical inter-module connections. In: Engineering Structures, v. 241 (August 2021).
- (2021): Precast columns connected with grouted corrugated steel sleeves and UHPC tenon under combined bending and compression. In: Engineering Structures, v. 235 (May 2021).
- (2016): Oxidation of Dyes by Alkaline-Activated Peroxymonosulfate. In: Journal of Environmental Engineering (ASCE), v. 142, n. 4 (April 2016).
- (2021): Spatiotemporal variation of wave energy induced by an accelerated moving atmospheric pressure disturbance. In: Coastal Engineering Journal, v. 63, n. 1 (January 2021).
- (2018): Quantifying the spatiality of urban leisure venues in Wuhan, Central China – GIS-based spatial pattern metrics. In: Sustainable Cities and Society, v. 40 (July 2018).
- (2021): SEM, FTIR and DSC Investigation of Collagen Hydrolysate Treated Degraded Leather. In: Journal of Cultural Heritage, v. 48 (March 2021).
- (2018): Parametric studies on buckling behavior of functionally graded graphene-reinforced composites laminated plates in thermal environment. In: Composite Structures, v. 202 (October 2018).
- (2013): Preparation and Characterization of Polycarboxylate Superplasticizer Synthesized at Non-Aqueous Condition. In: Applied Mechanics and Materials, v. 357-360 (August 2013).
- (2020): Shear properties of the interface between ultra-high performance concrete and normal strength concrete. In: Construction and Building Materials, v. 248 (July 2020).
- (2019): Solving Post-Buckling Characteristic of Thermal-Resistance Films Attached to Glass Façade via an Optimization Method. In: International Journal of Structural Stability and Dynamics, v. 19, n. 8 (August 2019).
- (2018): Seasonal Frost Penetration in Pavements with Multiple Layers. In: Journal of Cold Regions Engineering, v. 32, n. 2 (June 2018).
- (2008): Rip Currents with Varying Gap Widths. In: Journal of Waterway, Port, Coastal, and Ocean Engineering, v. 134, n. 1 (January 2008).
- (2018): Seismic performance comparison of precast segmental bridge girders with different cross sections and boundary conditions under vertical quasi-static cyclic testing: An experimental investigation. In: Advances in Structural Engineering, v. 21, n. 12 (March 2018).
Structurae cooperates with
