Lei Zhang 
- (2024): Coupled SPH-FEM analysis of piled power transmission tower system subjected to debris flow. In: Computers and Geotechnics, v. 168 (April 2024).
- (2023): Deep learning-assisted calculation of apparent activation energy for cement-based systems incorporating microencapsulated phase change materials. In: Construction and Building Materials, v. 404 (November 2023).
- (2023): Comparative study of performance of wicking and conventional railway geotextiles under the synergetic simulation of train loads and flooding. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): Correlation analysis of the gradation design parameters and mechanical performance of semi-flexible pavement. In: Construction and Building Materials, v. 404 (November 2023).
- (2023): Comprehensive evaluation and analysis of a nearly zero-energy building heating system using a multi-source heat pump in severe cold region. In: Building Simulation, v. 16, n. 10 (October 2023).
- (2023): Calculation the opening of neighboring surface cracks in concrete structure based on OFDR technology. In: Construction and Building Materials, v. 376 (May 2023).
- (2022): Composite finite elements on dynamic and buckling responses of composite beams with independent rotations. In: Structures, v. 45 (November 2022).
- (2022): Cyclic performance of steel frame fabricated with cold-formed steel composite wall structure. In: Engineering Structures, v. 270 (November 2022).
- (2022): Design method of the variable cross-section tunnel focused on improving passenger pressure comfort of trains intersecting in the tunnel. In: Building and Environment, v. 221 (August 2022).
- (2022): Contributions of bogie aerodynamic loads to the crosswind safety of a high-speed train. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 228 (September 2022).
- (2022): DeST 3.0: A new-generation building performance simulation platform. In: Building Simulation, v. 15, n. 11 (June 2022).
- (2022): A Design for Safety (DFS) Semantic Framework Development Based on Natural Language Processing (NLP) for Automated Compliance Checking Using BIM: The Case of China. In: Buildings, v. 12, n. 6 (7 June 2022).
- (2022): Comparison of the Influence of Double-Limb Double-Plate Joint on the Stability Bearing Capacity of Triangular and Quadrilateral Transmission Tower Structures. In: Buildings, v. 12, n. 6 (7 June 2022).
- (2020): Construction and Application of Height Control Model of Urban Building based on GIS: Taking Guanyun County as an Example. In: IOP Conference Series: Materials Science and Engineering, v. 730, n. 1 (1 January 2020).
- (2017): The Correlation between Indoor and Outdoor Particulate Matter of Different Building Types in Daqing, China. In: Procedia Engineering, v. 205 ( 2017).
- (2022): Composite-Wedge Anchorage for Fiber-Reinforced Polymer Tendons. In: Journal of Composites for Construction, v. 26, n. 2 (April 2022).
- (2022): Calcium Hypochlorite Pretreatment Enhances Waste-Activated Sludge Degradation during Aerobic Digestion. In: Journal of Environmental Engineering (ASCE), v. 148, n. 4 (April 2022).
- (2022): Design optimization of rural building in dry-hot and dry-cold area using a back propagation (BP) neural network. In: Energy and Buildings, v. 259 (March 2022).
- (2021): Deep displacement monitoring and foundation base boundary reconstruction analysis of diaphragm wall based on ultra-weak FBG. In: Tunnelling and Underground Space Technology, v. 117 (November 2021).
- (2021): Broadband ground-motion simulations by coupling regional velocity structures with the geophysical information of specific sites. In: Soil Dynamics and Earthquake Engineering, v. 145 (June 2021).
- (2019): Coupled analysis on land use, landscape pattern and nonpoint source pollution loads in Shitoukoumen Reservoir watershed, China. In: Sustainable Cities and Society, v. 51 (November 2019).
- (2020): Design of vertically stiffened steel plate walls under combined uniaxial compression and shear loads. In: Structures, v. 26 (August 2020).
- (2020): Chemical, rheological and aging characteristic properties of Xinjiang rock asphalt-modified bitumen. In: Construction and Building Materials, v. 240 (April 2020).
- (2018): Computational Analysis of Thermal Conductivity of Asphalt Mixture Based on a Multiscale Mathematical Model. In: Journal of Engineering Mechanics (ASCE), v. 144, n. 8 (August 2018).
- (2015): Design and development of safety evaluation system of buildings on a seismic field based on the network platform. In: Earthquake Engineering and Engineering Vibration, v. 14, n. 1 (February 2015).
- (2015): Bonding Behavior of Wet-Bonded GFRP-Concrete Interface. In: Journal of Composites for Construction, v. 19, n. 6 (December 2015).
- (2017): Design parameter of low-temperature performance for asphalt mixtures in cold regions. In: Construction and Building Materials, v. 155 (November 2017).
- (2018): Design and Performance Simulation of Road Bioretention Media for Sponge Cities. In: Journal of Performance of Constructed Facilities (ASCE), v. 32, n. 5 (October 2018).
- (2017): Computational Analysis of Thermal Conductivity of Asphalt Mixture Using Virtually Generated Three-Dimensional Microstructure. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 12 (December 2017).
- (2016): Determination of Optimal Frequency of Tuned Mass Damper for Super-tall Buildings Subjected to Service Level Earthquakes. Presented at: IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016.
Structurae cooperates with
