Ke Zhang 
- (2025): Evaluation Method for Compressive Properties of Segregated Asphalt Mixtures Based on Digimat and FEM Models. In: Journal of Materials in Civil Engineering (ASCE), v. 37, n. 2 (February 2025).
- (2025): Investigation of interface mechanics and crack propagation in warm-mixed rubber asphalt mixture under salt-freeze-thaw conditions. In: Construction and Building Materials, v. 458 (January 2025).
- (2025): Deformation monitoring of an adjacent subgrade consisting of lightweight foam concrete in a loess region. In: Construction and Building Materials, v. 458 (January 2025).
- (2024): Exploring mechanical properties and cracking behavior of AC-13 and OGFC-16 aggregate-segregated asphalt mixtures. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Investigation of mechanical properties, chemical composition and microstructure for composite cementitious materials containing waste powder recycled from asphalt mixing plants. In: Journal of Building Engineering, v. 96 (November 2024).
- (2024): Experimental investigation of the properties of epoxy asphalt mastic. In: Construction and Building Materials, v. 435 (July 2024).
- (2024): Effects of contaminant diffusion on the fresh air inlets of a clean room workshop. In: Building Services Engineering Research and Technology, v. 45, n. 3 (March 2024).
- (2024): Investigation of the interfacial bonding of new and old pavement materials for pothole applications: Bonding materials optimization, mechanical properties and structural performance. In: Construction and Building Materials, v. 425 (April 2024).
- (2024): The Application of Local Moran’s I and Getis–Ord Gi* to Identify Spatial Patterns and Critical Source Areas of Agricultural Nonpoint Source Pollution. In: Journal of Environmental Engineering (ASCE), v. 150, n. 5 (May 2024).
- (2023): Construction Quality Control for Rutting Resistance of Asphalt Pavement Using BIM Technology. In: Buildings, v. 14, n. 1 (31 December 2023).
- (2024): Adaptive beam with elastic support based on magnetorheological elastomers for modal modulation and vibration suppression. In: Smart Materials and Structures, v. 33, n. 3 (2 February 2024).
- (2023): Machine learning models to predict the residual tensile strength of glass fiber reinforced polymer bars in strong alkaline environments: A comparative study. In: Journal of Building Engineering, v. 73 (August 2023).
- (2023): Greenhouse Gas Control, Biofuel Recovery, and Nutrients Removal in Single-Chamber Microalgal Biocathode Microbial Fuel Cells. In: Journal of Environmental Engineering (ASCE), v. 149, n. 9 (September 2023).
- (2023): A framework for predicting the carbonation depth of concrete incorporating fly ash based on a least squares support vector machine and metaheuristic algorithms. In: Journal of Building Engineering, v. 65 (April 2023).
- (2022): Effect of curing temperature on the reaction kinetics of cementitious steel slag-fly ash-desulfurized gypsum composites system. In: Journal of Building Engineering, v. 62 (December 2022).
- (2022): Experimental and theoretical analysis on shear behavior of RC beams reinforced with GFRP stirrups. In: Structures, v. 46 (December 2022).
- (2022): Investigation on the properties of epoxy asphalt mixture containing crumb rubber for bridge expansion joint. In: Construction and Building Materials, v. 331 (May 2022).
- (2022): Evaluation of Performance Deterioration Characteristics of Asphalt Mixture in Corrosion Environment Formed by Snow-Melting Agents. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 3 (March 2022).
- (2021): Effect of initial water content on undrained shear strength of K0 consolidated clay. In: Soils and Foundations, v. 61, n. 5 (October 2021).
- (2021): Establishment of Rutting Model of Wheel-Tracking Test for Real-Time Prediction of Rut Depth of Asphalt Layers. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2020): Experimental Study of Bolt-Anchoring Mechanism for Bedded Rock Mass. In: International Journal of Geomechanics, v. 20, n. 4 (April 2020).
- (2021): Determination and Monitoring of Key Construction Control Indices for Low-Temperature Performance of Asphalt Mixtures Based on BIM Platform. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2021): Dynamic Modeling and CAE Cosimulation Method for Heavy-Duty Concrete Spreader. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2019): Investigation into the Exothermic Laws of Degradation for o-Phenylenediamine-Containing Wastewater by the Fenton Reaction. In: Journal of Environmental Engineering (ASCE), v. 145, n. 10 (October 2019).
- (2015): Camera Calibration Method Exploiting Reference Images and Roadway Information for Traffic Applications. In: Journal of Highway and Transportation Research and Development (English Edition), v. 9, n. 4 (December 2015).
- (2015): Advanced Optimization Design of Cross Beams Structure. In: The Open Civil Engineering Journal, v. 8, n. 1 (June 2015).
- (2017): The deterioration and performance improvement of long-term mechanical properties of warm-mix asphalt mixtures under special environmental conditions. In: Construction and Building Materials, v. 135 (March 2017).
- (2017): Accurate detection method for compaction uniformity of asphalt pavement. In: Construction and Building Materials, v. 145 (August 2017).
- (2017): Accurate detection and evaluation method for aggregate distribution uniformity of asphalt pavement. In: Construction and Building Materials, v. 152 (October 2017).
- (2018): Interlaminar Performance of Waterproof and Cohesive Materials for Concrete Bridge Deck under Specific Test Conditions. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 8 (August 2018).
Structurae cooperates with
