Jiupeng Zhang 
- (2024): Damage evolution in asphalt mixtures based on in-situ CT scanning. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Asphalt-aggregates interface interaction: Correlating oxide composition and morphology with adhesion. In: Construction and Building Materials, v. 457 (December 2024).
- (2024): Automated quantification of crack length and width in asphalt pavements. In: Computer-Aided Civil and Infrastructure Engineering, v. 39, n. 21 (22 October 2024).
- (2024): Components optimization of polyurethane-modified asphalt binder towards compatibility: Insight from molecular dynamics simulations. In: Construction and Building Materials, v. 448 (October 2024).
- (2024): Aluminate Long Afterglow Luminescent Materials in Road Marking Field Research Progress and Development: A Review. In: Buildings, v. 14, n. 7 (2 July 2024).
- (2023): Damage and responses of two asphalt pavement structures under blast loads: A numerical simulation. In: Construction and Building Materials, v. 409 (December 2023).
- (2024): Durable and Environmental Asphalt Pavement with Plant Fiber: A State-of-the-Art Review. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 3 (March 2024).
- (2023): Comprehensive evaluation of ballastless-track sealants based on macro–micro tests and principal component analysis. In: Construction and Building Materials, v. 400 (October 2023).
- (2022): Building the cooling roads with high thermal conductivity pavements to relieve urban heat island effect. In: Construction and Building Materials, v. 346 (September 2022).
- (2021): Effects of asphalt emulsion on the durability of self-compacting concrete. In: Construction and Building Materials, v. 292 (July 2021).
- (2021): Compaction characteristics assessment of Hot-Mix asphalt mixture using Superpave gyratory compaction and Stribeck curve method. In: Construction and Building Materials, v. 285 (May 2021).
- (2021): Design and evaluation of light-transmitting concrete (LTC) using waste tempered glass: A novel concrete for future photovoltaic road. In: Construction and Building Materials, v. 280 (April 2021).
- (2021): Correlation analysis between asphalt binder/asphalt mastic properties and dynamic modulus of asphalt mixture. In: Construction and Building Materials, v. 276 (March 2021).
- (2021): Development and verification of integrated photoelectric system for noncontact detection of pavement ponding and freezing. In: Structural Control and Health Monitoring, v. 28, n. 6 (April 2021).
- (2021): Design and evaluation of high–luminance porous asphalt mixtures based on wasted glass for sponge city. In: Construction and Building Materials, v. 273 (March 2021).
- (2021): Correlation between geometric parameters of coarse aggregates and mixing rheological indices of asphalt mixture. In: Construction and Building Materials, v. 269 (February 2021).
- (2020): Effect of different fibers on the properties of asphalt mastics. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Effect of fiber length and surface treatment on the performance of fiber-modified binder. In: Construction and Building Materials, v. 248 (July 2020).
- (2020): Analysis of mechanical properties for two different structures of photovoltaic pavement unit block. In: Construction and Building Materials, v. 239 (April 2020).
- (2018): Degradation reliability modeling of stabilized base course materials based on a modulus decrement process. In: Construction and Building Materials, v. 177 (July 2018).
- (2018): Effects of aging on rheological properties of asphalt materials and asphalt-filler interaction ability. In: Construction and Building Materials, v. 168 (April 2018).
- (2019): Characterizing Skeleton Structure and Stacking Properties of Continuous and Gap Graded Aggregate Mixtures. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2019): The effect of retreated coal wastes as filler on the performance of asphalt mastics and mixtures. In: Construction and Building Materials, v. 203 (April 2019).
- (2012): Development and Validation of Viscoelastic-Damage Model for Three-Phase Permanent Deformation of Dense Asphalt Mixture. In: Journal of Materials in Civil Engineering (ASCE), v. 24, n. 7 (July 2012).
- (2016): Development and validation of nonlinear viscoelastic damage (NLVED) model for three-stage permanent deformation of asphalt concrete. In: Construction and Building Materials, v. 102 (January 2016).
- (2016): Effects of temperature and loading frequency on asphalt and filler interaction ability. In: Construction and Building Materials, v. 124 (October 2016).
- (2016): Design and performance validation of high-performance cement paste as a grouting material for semi-flexible pavement. In: Construction and Building Materials, v. 126 (November 2016).
- (2017): Characterizing the three-stage rutting behavior of asphalt pavement with semi-rigid base by using UMAT in ABAQUS. In: Construction and Building Materials, v. 140 (June 2017).
- (2017): Applicability of evaluation indices for asphalt and filler interaction ability. In: Construction and Building Materials, v. 148 (September 2017).
- (2017): Comprehensive service properties evaluation of composite grouting materials with high-performance cement paste for semi-flexible pavement. In: Construction and Building Materials, v. 153 (October 2017).
Structurae cooperates with
