Jing Zhang 
- (2024): An investigation of texture-friction relationship with laboratory ring-shaped asphalt mixture specimens via close-range photogrammetry. In: Construction and Building Materials, v. 442 (September 2024).
- (2024): Novel interaction effects enhance specific energy absorption in foam-filled CFRP tapered tubes. In: Composite Structures, v. 343 (September 2024).
- (2024): Influence of wood species and natural aging on the mechanics properties and microstructure of wood. In: Journal of Building Engineering, v. 91 (August 2024).
- (2024): A modified model predicting the hydraulic properties of variably saturated soil accounting for film and capillary flow. In: European Journal of Environmental and Civil Engineering, v. 28, n. 11 (March 2024).
- (2024): On in-plane crushing behavior of an improved double-arrow auxetic metamaterial with two-step deformation mode. In: Engineering Structures, v. 303 (March 2024).
- (2023): Numerical Studies on the Performance Degradation of Headed Stud Shear Connectors in Composite Structures Under Freeze–Thaw Cycles. In: International Journal of Civil Engineering, v. 22, n. 4 (November 2023).
- (2023): Mapping urban scenescapes of ethnicity: a study of Tibetan cultural scenes in downtown Chengdu, China. In: Journal of Asian Architecture and Building Engineering, v. 23, n. 5 (November 2023).
- (2023): MobileNetV3-BLS: A broad learning approach for automatic concrete surface crack detection. In: Construction and Building Materials, v. 392 (August 2023).
- (2024): Optimization of mix proportion and strength prediction of magnesium phosphate cement-based composites based on machine learning. In: Construction and Building Materials, v. 411 (January 2024).
- (2024): Large-scale baseline model exploration from structural monitoring based on a novel information entropy-probability learning function. In: Computers & Structures, v. 292 (February 2024).
- (2024): Mechanical and thermal postbuckling of functionally graded graphene origami-enabled auxetic metamaterials plates. In: Engineering Structures, v. 298 (January 2024).
- (2023): Numerical analysis on the lateral resistance and reinforcement of bolted glulam post and beam structures with local cracks. In: Structures, v. 58 (December 2023).
- (2023): Optimal operation of energy storage system in photovoltaic-storage charging station based on intelligent reinforcement learning. In: Energy and Buildings, v. 299 (November 2023).
- (2023): Mechanical properties of rigid and flexible polyurethane foam in-situ foamed Nomex honeycomb. In: Composite Structures, v. 322 (October 2023).
- (2023): A Multiscale Fusion YOLOV3-Based Model for Human Abnormal Behavior Detection in Special Scenarios. In: Journal of Transportation Engineering, Part A: Systems, v. 149, n. 2 (February 2023).
- (2022): A novel pneumatic structure for reducing train-induced mass and heat transfers in a permafrost tunnel. In: Tunnelling and Underground Space Technology, v. 130 (December 2022).
- (2021): Nonlinear influence of urbanization on China's urban residential building carbon emissions: New evidence from panel threshold model. In: Science of The Total Environment, v. 772 (June 2021).
- (2022): Optimal reinforcement for improving the thermal performance of a permafrost tunnel based on coupled heat-mass transfer. In: Tunnelling and Underground Space Technology, v. 121 (March 2022).
- (2021): Laboratory investigation on the microstructure and performance of SBS modified epoxy asphalt binder. In: Construction and Building Materials, v. 270 (February 2021).
- (2019): A new physical parameter identification method for shear frame structures under limited inputs and outputs. In: Advances in Structural Engineering, v. 24, n. 4 (February 2019).
- (2020): A Large-Strain Vacuum-Assisted Radial Consolidation Model for Dredged Sludge Considering Lateral Deformation. In: KSCE Journal of Civil Engineering, v. 24, n. 12 (September 2020).
- (2018): Investigation of secondary phase separation and mechanical properties of epoxy SBS-modified asphalts. In: Construction and Building Materials, v. 165 (March 2018).
- (2018): Modified method for evaluating improved technologies for indoor thermal environment of earth buildings. In: Building and Environment, v. 144 (October 2018).
- (2020): Mechanical and durability properties of sustainable self-compacting concrete with recycled concrete aggregate and fly ash, slag and silica fume. In: Construction and Building Materials, v. 231 (January 2020).
- (2016): Organic montmorillonite reinforced epoxy mortar binders. In: Construction and Building Materials, v. 107 (March 2016).
- (2013): Optimal machine operation planning for construction by Contour Crafting. In: Automation in Construction, v. 29 (January 2013).
- (2015): Kriging response surface reliability analysis of a ship-stiffened plate with initial imperfections. In: Structure and Infrastructure Engineering, v. 11, n. 11 (December 2015).
- (2016): Noise reduction for modal parameters estimation using algorithm of solving partially described inverse singular value problem. In: Smart Materials and Structures, v. 25, n. 7 (July 2016).
- (2010): Parametric oscillation of cables and aerodynamic effect. In: Frontiers of Architecture and Civil Engineering in China, v. 4, n. 3 (August 2010).
- (2018): Mechanical Performance Assessment of Bolted Glulam Joints with Local Cracks. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 6 (June 2018).
Structurae cooperates with
