Chao Zhang 
- (2024): Enhancement mechanism of aggregate surface roughness structure on interfacial properties of asphalt mixtures. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Eccentric compressive behavior and design of high-strength CFST columns with embedded GFRP tubes. In: Engineering Structures, v. 320 (December 2024).
- (2024): Enhancing the High-Temperature Fracture Toughness of Ultrahigh-Performance Concrete through Optimization of Ternary Cement Matrix and Plastic Fiber Geometric Properties. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 10 (October 2024).
- (2024): Enabling multi-stage high-temperature strength evolution prediction of ceramizable composites using a novel multi-field coupled model. In: Composite Structures, v. 343 (September 2024).
- (2023): Effect of surface modification on properties of steel slag aggregate and mixture. In: Construction and Building Materials, v. 402 (October 2023).
- (2023): Dynamic Responses of Concrete-Face Rockfill Dam to Different Site Conditions under Near-Fault Earthquake Excitation. In: Buildings, v. 13, n. 10 (10 October 2023).
- (2023): Dynamic characteristics analysis and the identification signal of the horizontal tail drive shaft system with the ballistic impact damage of a helicopter. In: Structural Health Monitoring, v. 23, n. 2 (July 2023).
- (2023): Effect of preloading on vibration and buckling responses of variable stiffness composite cylindrical shells. In: Engineering Structures, v. 287 (July 2023).
- (2023): Development of composite action in a new long-span timber composite floor: Full-scale experiment and analytical approach. In: Engineering Structures, v. 279 (March 2023).
- (2023): An elastoplastic mechanical-thermal model for temperature rise simulation of two-dimensional triaxially braided composites under quasi-static loads. In: Composite Structures, v. 306 (February 2023).
- (2022): Dynamic Analyses and Simplified Methods for Evaluating Complicated Suspend-dome Structures Subjected to Sudden Cable Failure. In: International Journal of Steel Structures, v. 23, n. 1 (October 2022).
- (2022): Effect of concrete composition on drying shrinkage behavior of ultra-high performance concrete. In: Journal of Building Engineering, v. 62 (December 2022).
- (2021): Effect of iron on the preparation of iron-rich calcium sulfoatablluminate cement using gypsum as the sole calcium oxide source and its incorporation into mineral phases. In: Construction and Building Materials, v. 290 (July 2021).
- (2023): Dynamic response analyses of long-span cable-stayed bridges subjected to pulse-type ground motions. In: Soil Dynamics and Earthquake Engineering, v. 164 (January 2023).
- (2022): Development of double-tangent method to determine transition points of three-stage permanent deformation of asphalt mixture. In: Materials and Structures, v. 55, n. 8 (16 September 2022).
- (2022): Dynamic response of sea-crossing bridge under combined seismic and wave-current action. In: Structures, v. 40 (June 2022).
- (2022): A dynamic criterion for failure probability prediction of GFRP laminates using Lamb wave velocity with improved accuracy and consistency. In: Composite Structures, v. 291 (July 2022).
- (2021): Developing fragility curves for asphalt mixture to assess the uncertainty of the permanent deformation performance. In: Construction and Building Materials, v. 310 (December 2021).
- : Effect of High Pressure and Flocculant on Permeability and Consolidation Characteristics of Fine Tailings. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering.
- (2021): Dynamic mechanical behaviour of three-dimensional random fibrous materials at high temperatures. In: Composite Structures, v. 276 (November 2021).
- (2021): Effect of fiber architecture on the impact resistance of composite panels subjected to metallic projectile. In: Composite Structures, v. 273 (October 2021).
- (2021): Enabling rapid fatigue life prediction of short carbon fiber reinforced polyether-ether-ketone using a novel energy dissipation–based model. In: Composite Structures, v. 272 (September 2021).
- (2021): Ductility Demand Spectra of the Self-Centering Structure Subjected to Near-Fault Pulse-like Ground Motions. In: Journal of Earthquake Engineering, v. 26, n. 12 (July 2021).
- (2021): Discussions on extension of traditional cohesive element for delamination modeling of laminates used in combination with phantom node intraply elements. In: Composite Structures, v. 261 (April 2021).
- (2021): Effectiveness and robustness of an asymmetric nonlinear energy sink‐inerter for dynamic response mitigation. In: Earthquake Engineering and Structural Dynamics, v. 50, n. 6 (May 2021).
- (2020): Effect of the Double-Line Spiral Tunnel Curvature on the Tunnel Construction Stability. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Energy-saving potential of 3D printed concrete building with integrated living wall. In: Energy and Buildings, v. 222 (September 2020).
- (2019): Development of a two-phased nonlinear mass damper for displacement mitigation in base-isolated structures. In: Soil Dynamics and Earthquake Engineering, v. 123 (August 2019).
- (2012): Environment-Assisted Subcritical Debonding of Epoxy-Concrete Interface. In: Journal of Composites for Construction, v. 16, n. 5 (October 2012).
- (2018): Dynamic load prediction of tunnel boring machine (TBM) based on heterogeneous in-situ data. In: Automation in Construction, v. 92 (August 2018).
Structurae cooperates with
