Yi Zeng 
- : Predicting the degree of rubber rupture damage using a GAN-enhanced Bayesian-optimized 1DCNN network. In: Structural Health Monitoring.
- : A multitask framework with self-attention mechanism for simultaneous detection of axial pressure, shear deformation, and rupture damage in rubber bearings. In: Structural Health Monitoring.
- (2024): Predictive methods for the evolution of oil well cement strength based on porosity. In: Materials and Structures, v. 57, n. 10 (7 November 2024).
- : Enhancing rubber rupture detection in rubber bearing through generative adversarial network and feature-bagging zero-shot methodology. In: Structural Health Monitoring.
- (2024): DetachSense rubber bearing for convenient axial load prediction using active sensing and Bayesian-optimized deep neural network. In: Engineering Structures, v. 315 (September 2024).
- (2024): Study on durability of concrete under alternating positive and negative temperature curing in plateau area. In: Construction and Building Materials, v. 436 (July 2024).
- (2024): Novel model for evaluating ground settlement risk in slurry balance shield tunnel construction. In: Tunnelling and Underground Space Technology, v. 150 (August 2024).
- (2024): Investigation into the Bearing Capacity and Mechanics Behavior of the Diaphragm Connection Form of a Utility Tunnel. In: Buildings, v. 14, n. 3 (21 February 2024).
- (2023): Combination of active sensing method and data-driven approach for rubber aging detection. In: Structural Health Monitoring, v. 23, n. 4 (November 2023).
- (2024): Data-driven real-time prediction for attitude and position of super-large diameter shield using a hybrid deep learning approach. In: Underground Space, v. 15 (April 2024).
- (2023): Risks analysis of large diameter slurry shield tunneling in urban area. In: Underground Space, v. 13 (December 2023).
- (2023): A deep learning method to monitor axial pressure and shear deformation of rubber bearings under coupled compression and shear loading. In: Earthquake Engineering and Structural Dynamics, v. 52, n. 11 (June 2023).
- (2022): Detection of rupture inside rubber bearings using active sensing method. In: Engineering Structures, v. 271 (November 2022).
- (2021): Based on auxetic foam: A novel type of seismic metamaterial for Lamb waves. In: Engineering Structures, v. 246 (November 2021).
- (2021): Development of distributed tunable friction pendulum system (DTFPS) for semi-active control of base-isolated buildings. In: Bulletin of Earthquake Engineering, v. 19, n. 14 (September 2021).
- (2021): Shear deformation detection in smart rubber bearing (SRB) using active sensing method. In: Engineering Structures, v. 242 (September 2021).
- (2003): Measurement and simulation of indoor air quality and energy consumption in two Shanghai office buildings with variable air volume systems. In: Energy and Buildings, v. 35, n. 9 (October 2003).
- (2020): Adhesion property of bituminous crack sealants to different asphalt mixtures based on surface energy theory. In: Construction and Building Materials, v. 261 (November 2020).
- (2020): Adhesion of Bituminous Crack Sealants to Aggregates Using Surface Energy Theory. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 10 (October 2020).
- (2020): Influences of sub-atmospheric pressure on downward flame spread over typical insulation material with parallel glass curtain wall structure in underground buildings. In: Tunnelling and Underground Space Technology, v. 103 (September 2020).
- (2020): A novel robust optimum control algorithm and its application to semi-active controlled base-isolated structures. In: Bulletin of Earthquake Engineering, v. 18, n. 5 (January 2020).
- (2020): Experimental study of isolation in the backfill zone of the foundation pit (IBF) method to reduce ground-borne vibration in buildings. In: Engineering Structures, v. 202 (January 2020).
- (2018): Thermal and fire risk analysis of low pressure on building energy conservation material flexible polyurethane with various inclined facade constructions. In: Construction and Building Materials, v. 167 (April 2018).
- (2019): Coupling effects of pressure and inclination on downward flame spread over flexible polyurethane foam board. In: Building and Environment, v. 164 (October 2019).
- (2020): Numerical study of isolation in the backfill zone of foundation pit method to reduce railway generated vibration in highârise buildings. In: The Structural Design of Tall and Special Buildings, v. 29, n. 2 (10 February 2020).
- (2018): Experimental study on thermal safety analysis of flexible polyurethane at various facade inclined structures under low ambient pressure condition. In: Engineering Structures, v. 176 (December 2018).
Structurae cooperates with
